Does somebody know how to repair a clicking HDT72550VLAT80 with PC3000.

Hi,

if u have a genuine tool, U should also have some info about what problems may cause such symptoms and also have some idea that in 95% of the cases it is not possible to repair the drive using ANY SW.

pepe

_________________
Adatmentés - Data recovery

Most of the time Knocking Hitachi has HDA problem , Replace and see if fix it

I swapped PCB an d now I think that NRAM is corrupted. How to recover.

Diagnose properly, then fix. I always say... If your only tool is a hammer, your problems start looking like nails.

I sure. My PCB NVRAM's is corrupted

If you have the skills to diagnose corrupted NVRAM, then fixing ths should be easy for you. Best of luck.

Your are very negative. I a document from salvation its clearly explain that PCB swap corrupt NVRAM. Where is the problem. If you want to help me it's ok. Otherwise don't bother.

I'm happy to help, but if you want helpful answers, you have to ask better questions, and be able to accept the answers.

Again, best of luck in your recovery.

I think u did not diagnose the problem correctly how can u say that nvram is currupt ?

u dont need to make question after accurate diagnose... Your tool is a professional tool, try to diagnose properly.
best of luck.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com

Hi,

Why not try HD Doctor for Hitachi?

NVRAM repair , see the details at http://support.salvationdata.com/tutorial.htm.

I hope it will help you, if you want to purchase the products, please contact me at sales.laura@salvationdata.com.

Best Regards,

Laura

_________________
SalvationDATA--Profesionnal Hard drive solution Provider. MSN: sales.laura@salvationdata.com

Hello Laura,

why would he spend his money unless sure about it will help? (I understand U of course , but he won't be very happy with a tool not appropriate for this particular case... This is not your interest either.
Since I believe 90% of clicking is caused by bad head it would be needless to buy any FW repair tool in the first turn I think.
Good diagnosis is the most important thing in this field.
If one doesn't have the faintest idea what's going on in a HDD he should not mess with it until he gains some knowledge and the right way of thinking. This won't come at a glance, for this U need to spend years in electronics and HDD technology. This cannot be gained on a forum.

pepe

_________________
Adatmentés - Data recovery

Hi

I tried to debug my hdd with PC3000 and the log window clearly says that NVRAM is corrupted! Perhaps, head stack is also out of order but NVRAM corruption is real.



Best regards

u are not understanding !! and no body want to help u, if u dont believe what experts told u .the log wich u got , doesnt means the NVRAM its damaged, means the PC3000 System cannot access because u hdd its not answering, all right?

Best Regards

If the NVRAM is corrupted , the drive doesn't click...

If you swap PCB then NVRAM is likely ot be different, and incompatible not corrupt. You need to access this HDD using the patient NVRAM.

I do believe that even with the correct NVRAM on a donor PCB the HD will still click. There are around 4 opinions that there is HDA damage, 4 opinions from 4 different experts who's judgement i would trust.

Put original PCB back, and replace heads. Good luck