February 29th, 2012, 20:19
March 1st, 2012, 1:53
March 1st, 2012, 4:32
May 3rd, 2012, 21:34
fzabkar wrote:If you are asking how to reprogram the serial flash memory chip that you see on most HDD PCBs, then here is one way:
read-write-serial-flash-wdc-logic-boards-t7192.html
Alternatively, there is PonyProg freeware, but you will need to construct a simple interface circuit:
http://www.lancos.com/prog.html
Be aware that the bulk of the drive's firmware is stored in a hidden System Area on the platters:
newbie-info-from-and-for-newbies-about-firmware-etc-t6562.html
May 3rd, 2012, 22:17
KALIMUTHU wrote:Hi,
How to update HDD firmware chip.which (programmer) adapter can use?
Thank you
May 4th, 2012, 3:01
fzabkar wrote:If you are asking how to reprogram the serial flash memory chip that you see on most HDD PCBs, then here is one way:
read-write-serial-flash-wdc-logic-boards-t7192.html
May 4th, 2012, 3:22
Powered by phpBB © phpBB Group.