READ ROM

[RAJOO]

hi

i want to read rom.

10tb seagate.

is that possible wihout soldering

any connector like this ?

https://www.aliexpress.com/item/1005003937748732.html

Attachments

[RAJOO]

any information about these 2 roms

both ic/chips have 2mb data

the rom have 2 copies ?? or

one chip/ic have 1mb data

when we read rom via mrt shows 2mb.

which rom mrt read,

which rom we need to read for UNPACK with F3 ROM
Explorer,

any any any information/details, about

please
please
please

[gold6565]

any information about these 2 roms

both ic/chips have 2mb data

the rom have 2 copies ?? or

one chip/ic have 1mb data

when we read rom via mrt shows 2mb.

which rom mrt read,

which rom we need to read for UNPACK with F3 ROM
Explorer,
If you read one ROM using MRT, you can read the second one, just swap the first pin
any any any information/details, about

please
please
please

If you read one ROM using MRT, you can read the second one, just swap the first pin

[RAJOO]

sir

just few say few words, ( just swap the first pin)

how to do this.

please

any information about these 2 roms

both ic/chips have 2mb data

the rom have 2 copies ?? or

one chip/ic have 1mb data

when we read rom via mrt shows 2mb.

which rom mrt read,

which rom we need to read for UNPACK with F3 ROM
Explorer,
If you read one ROM using MRT, you can read the second one, just swap the first pin
any any any information/details, about

please
please
please

If you read one ROM using MRT, you can read the second one, just swap the first pin

Attachments

[fzabkar]

You need to swap the CS* pins so that ROM1 becomes ROM2 and ROM2 becomes ROM1. However, it's not clear to me which trace is CS*. You'll need to do some investigative work.

https://www.onsemi.com/pdf/datasheet/le25s161-d.pdf

[gold6565]

Two ROMs have seven contacts connected to each other, they need to be found. One contact will remain, the first one.