SMART structure on Matrox Hdd

[BlackST]

McGyvering is (C) BlackST 2006,2007,2008,2009,2010....

[N.C.]

McGyvering is (C) BlackST 2006,2007,2008,2009,2010....

Sorry for that.

Should I pay for use it?

[guru]

True some SMART parameters are wired to modules within the Utility Area. For example ..
G-List SMART ID5 is connected to G-List
Temp is connected to temp sensor
etc etc

You can reset smart parameters all day and all night but you will always have a big G-list (if you have real G-list entries) :O)

Your drive is old and cries for the trash/bin/rubbish heap

Thanks for your replies.

To Guru: Maybe some special ATA commands can reset the SMART...

Yes, on maxtor, with special techno commands, You can reset the smart.
But if You have G-list problems, this will not solve your problem anyway.

(The smart will cleared for like start stop count:1, and so on, but still failed with a lot of reallocated sectors....)

Regards,
Janos

[BlackST]

Uhm... the drive cries for SS ! SS ! SS !!

[Iszerda]

Thanks for all answers!

I want to backup my disk first.
Maybe copyr can do it on another board.
Thanks Janos : privat üzenet mehet?

BlackSt: What does SS mean?

[Iszerda]

To Guru:- if you have a REAL G-list-
I'm thinking on this.
Thanks

[N.C.]

Thanks for all answers!

I want to backup my disk first.
Maybe copyr can do it on another board.
Thanks Janos : privat üzenet mehet?

BlackSt: What does SS mean?

Persze, jöhet!

SS means SelfScan, the factory recalibration routine wich destroys the data, and recalibrates the adaptives.