No Phy: Staggered spin bypass ???????

[ipcsc]

seagate 7200.11

Rst 0x10M
RW subfile error 205f
RW subfile error 205f
ASCII Diag mode

F3 T>m0,2,1,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 14, Max Certify Rewrite Retries = 2DF8

User Partition Format 3% complete, Zone 00, Pass 00, LBA 00031FE9, ErrCode 00000080, Elapsed Time 0 mins 30 secs
User Partition Format Successful - Elapsed Time 0 mins 30 secs

F3 T>
Spinning Down

Spin Down Complete
Elapsed Time 6.015 secs
Delaying 5000 msec

Jumping to Power On Reset
Rst 0x10M

(P) SATA Reset
PASSPackage Verified
No Phy: Staggered spin bypass
ASCII Diag mode

F3 T>/1

F3 1>N1
Clear SMART is completed.
F3 1>
Rst 0x10M
(P) SATA Reset
PASSPackage Verified
No Phy: Staggered spin bypass
ASCII Diag mode

F3 T>

____________
hlep me, what i make now ?

sorry my english is not good

[northwind]

I have tried to explain to you in other thread that this message "No Phy"... means nothing, you can ignore it. The problem on your hard disk is somewhere else.

Your english is not good and communication is nearly impossible. Yet you opened up a new thread with exactly same topic and content, and that is not accepted by forum rules.

[ipcsc]

sorry

[northwind]

If you can find someone who can write better english than you, and can explain the exact problem of your drive and its behaviour, then someone will help you for sure. Maybe a friend of yours can help in communicating better with this forum.

Good luck.