In-depth technology research: finding new ways to recover data, accessing firmware, writing programs, reading bits off the platter, recovering data from dust.
Forum rules
Please
do not post questions about data recovery cases here (use
this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...
May 19th, 2014, 7:55
I need your help !
I'm trying, through a program called HDDHACKR, to change the data for several wd hdd, how s / n, model and firmware version. I have problems with "model", because once flashed the changes, this string is cut to a maximum of 18 characters. Why?
Sorry for my English .
May 19th, 2014, 12:05
Sorry , 21 characters max .
May 19th, 2014, 15:38
The model number should occupy 40 bytes.
HddHackr — how it modifies a Western Digital drive for use in an Xbox 360:
http://www.users.on.net/~fzabkar/HDD/Hd ... lysis.htmlYou can select your own parameters by modifying a HDDSS.BIN file and using HDDHackr to make the changes to your drive:
HDDHackr - lost UNDO.BIN - how to restore capacity:
http://malthus.zapto.org/viewtopic.php? ... 141&p=2927DO NOT apply a foreign UNDO.BIN file to your drive, not even one from the same model.
May 19th, 2014, 16:04
@rosdade, if you show me your original UNDO.BIN file, I can edit it for you and you can then write this edited version back to your drive. That should be safe to do.
May 19th, 2014, 16:35
Yes, I have a clean backup of the security sector of the hard disk! I've tried to edit that file, the checksum also calculated, but nothing, max 21 characters for the string "model".s / n and firmware version successfully changed!
@Fzabkar tomorrow I'll send you the file Undo.Bin clean and modified by me. Meanwhile, thanks to the support
Powered by phpBB © phpBB Group.