All times are UTC - 5 hours [ DST ]


Switch to mobile style

Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Ultrasonic Bath / Cleaner - Your Research Versus Mine
PostPosted: August 18th, 2019, 14:15 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2932
Location: CDRLabs @ Chandigarh [ India ]
Hi Folks ,
My old pi$% poor " Ultrasonic Cleaner " that i had since ages its time is up .I am developing a small new lab with the following features as stated below .I would like to do the following things in this lab 1 : Cleaning Heads Of Mechanical Hard Drives , 2 : Cleaning Platters Of Mechanical Hard Drives , 3 : Physically Cutting Mechanical Hard Drives Heads And Doing Some Other Research Regarding Working Around Damaged Platters For Partial Data Recovery , I am already doing the same but i need a dedicated lab for this work as this work clutters my current cleanroom setup

Lab Features :

1 : Entire Room Is Filtered By External HEPA Filters ,Custom Made And Attached To Wall of This Lab
2 : A Laminar Flow Cabinet Fully Customized With Various Lights White ,Yellow And Green
3 : Stainless Steel Side Racks With Custom Storage Boxes For heads and platters including patients and donors
4 : Tools that are custom made and have nothing to do with brands like hddsurgery , apextools etc etc

I am wanting to know the make and model of the " Ultrasonic Bath " AKA " ultrasonic cleaners " you use .My today research is that we can get the following features

1 : Fixed 40 Khz frequency [ Or variable frequency , will that have any effect on our work regarding mechanical hard drives ]
2 : Heater or no heater function [ Whats the safe temperature for solvents we use if anyone has done that research ,As running the ultrasonic will increase temp automatically also ]
3 : Fixed of variable power

PS : I would then like to CNC a Special Jig for cleaning Heads and Platters of hard drives , If you do not want to discuss here ,please pm me

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Ultrasonic Bath / Cleaner - Your Research Versus Mine
PostPosted: August 24th, 2019, 12:50 
Offline
User avatar

Joined: March 15th, 2017, 10:25
Posts: 10
Location: Berlin
Hey, just a short question about a very basic btw... do you use one-way gloves for your work under the bench or do you use them for several client drives / a longer time?

Greets

Robert


Top
 Profile  
 
 Post subject: Re: Ultrasonic Bath / Cleaner - Your Research Versus Mine
PostPosted: August 25th, 2019, 6:19 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 2932
Location: CDRLabs @ Chandigarh [ India ]
crashpcberlin wrote:
Hey, just a short question about a very basic btw... do you use one-way gloves for your work under the bench or do you use them for several client drives / a longer time?

Greets

Robert



Robert ,
I use 1 pair of gloves per case , Even When its 5 to 15 minutes inspection i will never reuse the gloves

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group