All times are UTC - 5 hours [ DST ]


Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: ERROR 4f00 error 4f10 WD
PostPosted: June 28th, 2020, 22:20 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
Hi, I'm new to the forum and I have some questions and would like to know if you can help me?


Estou com esse erro esse erro da imagem e não consigo fazer nada com o hd no sediv.


Attachments:
sediv wd.PNG
sediv wd.PNG [ 109.04 KiB | Viewed 21473 times ]
Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 0:09 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
Palmer Lock.
Need unlock PCB.


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 9:54 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
Can I unlock this in the sediv?


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 14:47 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
Not.
Оnly buy unlocked PCB.
https://www.donordrives.com/unlocked-wd ... drive.html
Or.
Sediv possible if find an unlocked board for a while to unlock your own.


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 16:00 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
Tomset wrote:
Not.
Оnly buy unlocked PCB.
https://www.donordrives.com/unlocked-wd ... drive.html
Or.
Sediv possible if find an unlocked board for a while to unlock your own.


PCB is more expensive than HD. Can I unlock mine through the sediv?


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 16:01 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
PCB is more expensive than HD. Can I unlock mine through the sediv?


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 16:11 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
Alas.
Without an unlocked board, no matter how.
Already having an unlocked board, you can unlock your own.
You can contact someone who has such an unlocked board and he will unlock yours.
Moreover, he can unlock such a board only a few times. Then he will have to buy a new one.


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 17:26 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
Will I get the unlocked pcb, will I be able to unlock the others by sediv?
Thank you for the time being.


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 17:37 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
Sorry, can you tell me the procedure? To be done as soon as I can?


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 17:53 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
https://forum.acelaboratory.com/viewtop ... 032#p36392


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 21:58 
Offline

Joined: August 12th, 2017, 20:36
Posts: 9
Location: Brasil
Sorry, I disturb you again, but from what I saw in that post, when the pcb blocks, it wouldn't let me do anything with the hd, in my case I see the capacity, I install, record, I just can't clean the smart, give the error I sent in the post. Do you check what I said?


Top
 Profile  
 
 Post subject: Re: ERROR 4f00 error 4f10 WD
PostPosted: June 29th, 2020, 23:14 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
renatofls,
In the beginning, you need an unlocked board.
With her help, you can unlock your board.
Аnd not otherwise.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group