March 17th, 2009, 15:25
hello everyone. due to a recent house fire, a good number of my hard drives have damaged/burnt logic boards. before attempting to send them off for professional recovery, i'd like to attempt a logic board swap if possible with these drives. i'm currently researching, but i'd figured i'd start to look for pcb in advance.
the labels are partially burned, so i'll post the information that i can read.
Drive 1: Seagate Barracuda 7200.11 1TB
S/N: 9QJ09FKH
P/N: 9BX158-568 or 9BXT58-568
Firmware: SD35
Date Code: 08307
Site Code: KBATSG or K8ATSG or KRATSG
Drive 2: Seagate Barracude 7200.8 400GB
PCB number: 100335769 F 7532JWE4
Label on HDA near spindle motor: A55275DDAAA 7Z652 3D
Thanks in advance!
March 18th, 2009, 12:10
hello,
please send images of your PCB both side to my email if you would like to do it.
sunnydreamspace@hotmail.com. thanks.