Looking for PCB board for WD2500KS

[orion3999]

i am looking for a PCB board for a Western Digital WD2500KS
MDL:WDS2500KS-00MJB0
DCM:DSCANTJAA

Board:2061-701335-C00

i will take any board that will make this drive work. i am trying to recover data. if you have a board that will work, please provide location of proof, so that i may confirm.

[networkpc3000]

hi,
i have this PCB in stock. please contact me by MSN or email. thanks.

[fzabkar]

Can you upload a detailed photo of the component side?

What is the failure symptom?

[orion3999]

not detected in bios. no sound of drive spinning up.

[networkpc3000]

take off PCB and have a look. SMOOTH chip may burned already.

[orion3999]

here is a pic of the board and the top of the drive.

the full number on the bottom of the drive is
2061- 701335-C00 AG XC 2W130N8S B 0004400 6404

Attachments

board is burned bottom left

top of drive

[fzabkar]

Your motor controller chip is damaged.

You will probably need to transplant the 8-pin serial EEPROM chip at location U12 from patient to donor. This is because it stores unique drive calibration data.

[orion3999]

wont i be able to just swap in a new board?

[pcimage]

No, you need to transfer U12 also.