Buy/sell hard drives, parts, tools
March 25th, 2010, 8:52
MODEL: WD6400AAKS-75A7B0
S/N: WMASY250208
DCM: HARNHV2CA
ORIGIN: MALAYSIA
LBA: 1250263728
FIRMWARE: B0
PCB:2061-701537-E00 07PD3 XW 5B22 YGQC 3 0001040 9041 (WHITE LABEL),
2060-701537-003 REV A (ETCHED)
March 25th, 2010, 20:28
hi,
have in stock. please contact me by email or MSN. could be help you program firmware into MCU. thanks.
March 26th, 2010, 2:34
Hi,
We have this working PCB too, pls contact my hotmail.
Thanks
Eric
March 29th, 2010, 4:45
Before you go buy the donor drive, what's wrong with your hard drive??? This AAKS model is often time out side of DIY arena due to the PCB design.
March 29th, 2010, 6:19
hddmania wrote:Before you go buy the donor drive, what's wrong with your hard drive??? This AAKS model is often time out side of DIY arena due to the PCB design.
Agreed, for this model, you also need to reprogram rom. ^^
March 29th, 2010, 9:52
Well, problem is that it won't power up, tried 2 different sources. I used it via USB adaptor (have an older pc w/o SATA) to transfer files from another drive for reformat. After reformatting the other drive, this one failed. All I have on this drive are PSP & PS2 backup iso files. Everything else on it is either expendable or on another pc.
I did however plan to replace my existing secondary drive (seagate 120gb) with this one(via pci SATA controller). The problem drive was only used for 15 months in my brother-in-law's pc....they thought it crashed and bought a new 750gb from Dell.
March 30th, 2010, 0:37
Awwww.
I would say RMA the drive. It will cost you more to find the replacement PCB that will work on your drive.
Powered by phpBB © phpBB Group.