Buy/sell hard drives, parts, tools
August 13th, 2011, 12:14
I have ordered a donor drive for my wd1600bevs, but there is no u12 chip on the PCB. The info is stored on the cpu of the board, and I do not have a pc3000 to transfer the rom to the new donor board.
Could someone in the US with a pc3000 do this for me? Please email me your price and turn-around-time.
Thanks,
- Attachments
-

-

August 13th, 2011, 20:58
What is the problem with the drive? There is more to reprogramming a donor than just owning PC3000.
August 13th, 2011, 21:32
The drive is not recognized in bios or DDI. It makes a few quiet clicks and powers off. I would like to swap the PCB with a donor PCB as my first step, but I cannot swap the rom because its stored on the processor on the board.
August 14th, 2011, 4:14
What does your Scott Moulton distance learning guide say to do in these circumstances?
what-certification-scott-moulton-offering-his-course-t19566.html#p131586
August 14th, 2011, 9:41
Stay on the topic. Either you can help me or not. I'm looking to outsource pcb rom swap since I don't have the tools to do it.
August 15th, 2011, 14:44
The PCB turned out to be ok. I replaced the head assembly with my donor drive and now the DDI is imaging it. Thanks for the input, I would have thought it was the PCB!
August 15th, 2011, 19:27
It's all about the diagnostic
Powered by phpBB © phpBB Group.