New alternative pinout sockets for SD cards MR40 and MR39
April 3rd, 2025, 3:25
Hello guys,
As you know we are not leaving you with only main adapter and standard pinouts but day by day trying to make new sockets/pinouts for adapters you have. Today we offer new alternative pinout for our flagship MR adapters are available in our store for ALL users of MR40 and MR39 !!!
Socket for MRSD40 adapter - Model MR40AP4
Socket for MRSD39 adapter - Model MR39AP4
Socket for MRSD40 adapter - Model MR40AP4 is an alternative pinout for the NAND MR40 series adapter that allows you to change the standard pinout / connection diagram to another when connected to monolithic SD cards.
Support below card:
Link: https://multi-com.eu/shrt-Fa75nrh3L
Socket for MRSD39 adapter - Model MR39AP4 is an alternative AP1 pinout for the first NAND MR39 series adapter channel allowing the change of the standard pinout / connection diagram to another one when connected to monolithic SD cards.
Support below card:
Link: https://multi-com.eu/shrt-KBzXhrS1r
ATTENTION: These products is only available to holders of MR SD adapters - when ordering, the serial number of the adapter will be required (the number is on the adapter housing).
Want to see all our range of adapters ? Visit https://multi-recovery.com/
As you know we are not leaving you with only main adapter and standard pinouts but day by day trying to make new sockets/pinouts for adapters you have. Today we offer new alternative pinout for our flagship MR adapters are available in our store for ALL users of MR40 and MR39 !!!
Socket for MRSD40 adapter - Model MR40AP4
Socket for MRSD39 adapter - Model MR39AP4
Socket for MRSD40 adapter - Model MR40AP4 is an alternative pinout for the NAND MR40 series adapter that allows you to change the standard pinout / connection diagram to another when connected to monolithic SD cards.
Support below card:
Link: https://multi-com.eu/shrt-Fa75nrh3L
Socket for MRSD39 adapter - Model MR39AP4 is an alternative AP1 pinout for the first NAND MR39 series adapter channel allowing the change of the standard pinout / connection diagram to another one when connected to monolithic SD cards.
Support below card:
Link: https://multi-com.eu/shrt-KBzXhrS1r
ATTENTION: These products is only available to holders of MR SD adapters - when ordering, the serial number of the adapter will be required (the number is on the adapter housing).
Want to see all our range of adapters ? Visit https://multi-recovery.com/
Powered by phpBB © phpBB Group.