All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: USB to SATA probe PCB!!!
PostPosted: September 7th, 2021, 3:59 
Offline
User avatar

Joined: September 7th, 2021, 2:59
Posts: 6
Location: Beijing
USB to SATA probe PCB: FDD UTS PC-3000 series adapter , currently has the following 7 models:
used for data recovery and electronic forensics of Western Digital USB HDD!
For WD USB HDD data security, we recommend using FDD UTS PC-3000 series adapter
1:PC-3000 for WD USB 800067  
Attachment:
123201kor9czz88c5mnbtw.png
123201kor9czz88c5mnbtw.png [ 94.78 KiB | Viewed 1400 times ]

2:PC-3000 for WD USB 800069  
Attachment:
123142k23fd8gb2djdu81k.png
123142k23fd8gb2djdu81k.png [ 125.33 KiB | Viewed 1400 times ]

3:PC-3000 for WD USB 810003
Attachment:
0136235ue2u5tghrepy2a7.jpg
0136235ue2u5tghrepy2a7.jpg [ 77.47 KiB | Viewed 1400 times ]

4:PC-3000 for WD USB 810012 
Attachment:
013624qusdunrumjnhnedu.jpg
013624qusdunrumjnhnedu.jpg [ 83.92 KiB | Viewed 1400 times ]
 
5:PC-3000 for WD USB 810033
 
6:PC-3000 for WD USB 810035 
Attachment:
012140wyccow46doz38acx.jpg
012140wyccow46doz38acx.jpg [ 77.63 KiB | Viewed 1400 times ]
 
7:PC-3000 for WD USB 800041
Attachment:
013623p6gb2y64g3jzbd2z.jpg
013623p6gb2y64g3jzbd2z.jpg [ 77.75 KiB | Viewed 1400 times ]


Part of the USB corresponding /TYPE-C /SATA reference table:
1.   65 800067-USB PCB 3.0  / 810003- TYPC PCB /SATA PCB    800065
2.   66 800069-USB PCB 3.0  /                        /SATA PCB    800066   
3.   22 800041-USB PCB 3.0  / 810012-TYPC PCB  /SATA PCB     800022
4.   30 810035-USB PCB 3.0  / 810033-TYPC PCB  /SATA PCB     810030
You can use it like this:
Attachment:
图片1.png
图片1.png [ 514.91 KiB | Viewed 1400 times ]

This PCB-FHDD UTS has its advantages:
No need to solder wires for Original PCB of patient HDD , But data can  read , This method will not damage the original PCB and just remove 4 capacitors that will improve data security, The new test point PCB of HDD is small in size, not easy to Welding wires, The USB PCB of patient HDD to Soldering wires with new young engineers is difficult and has a very high risk of easily damaging the PCB!!!
FHDD UTS itself is not a decryption board, it can be combined with a USB decryption board to form a SATA decryption board.
If you are interested,Contact us via Skype:+8617319153943.
Produced by Beijing JunDaCheng Technology Company Limited.Piracy is strictly prohibited。


Attachments:
122650a3uoh7quz4hamogu.png
122650a3uoh7quz4hamogu.png [ 84.98 KiB | Viewed 1400 times ]
Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 7th, 2021, 23:56 
Offline
User avatar

Joined: September 7th, 2021, 2:59
Posts: 6
Location: Beijing
Here is the video
https://www.bilibili.com/video/BV1cq4y1S7sx/


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 8th, 2021, 17:42 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 13501
Location: Australia
Can you leave the capacitors in place if you can ensure that the USB-SATA bridge is "quiet"? For example, if you were to short the crystal for the bridge IC, would this disable the bridge and prevent it from interfering with SATA communications?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 8th, 2021, 21:54 
Offline
User avatar

Joined: September 7th, 2021, 2:59
Posts: 6
Location: Beijing
fzabkar wrote:
Can you leave the capacitors in place if you can ensure that the USB-SATA bridge is "quiet"? For example, if you were to short the crystal for the bridge IC, would this disable the bridge and prevent it from interfering with SATA communications?

yes,the crystal oscillator will interfere with SATA communication.

_________________
Beijing Jundacheng Technology Company Limited.
Website:http://www.jundacheng.com/bbs/forum.php?mod=viewthread&tid=6047


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 9th, 2021, 14:21 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 13501
Location: Australia
Junda wrote:
fzabkar wrote:
Can you leave the capacitors in place if you can ensure that the USB-SATA bridge is "quiet"? For example, if you were to short the crystal for the bridge IC, would this disable the bridge and prevent it from interfering with SATA communications?

yes,the crystal oscillator will interfere with SATA communication.

Huh?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 10th, 2021, 4:49 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3082
Location: CDRLabs @ Chandigarh [ India ]
fzabkar wrote:
Junda wrote:
fzabkar wrote:
Can you leave the capacitors in place if you can ensure that the USB-SATA bridge is "quiet"? For example, if you were to short the crystal for the bridge IC, would this disable the bridge and prevent it from interfering with SATA communications?

yes,the crystal oscillator will interfere with SATA communication.

Huh?


:mrgreen: ,
He is Chinese ,He did not understand what you said ,Technically if crystal is dead usb chip is not doing anythng ,But i will stlil remove capacitors as it isolates the chip connections and provides a stable connection

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 10th, 2021, 4:52 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3082
Location: CDRLabs @ Chandigarh [ India ]
Junda wrote:


Hi,
PM me the pricing of all the boards ...

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 10th, 2021, 20:52 
Offline
User avatar

Joined: September 7th, 2021, 2:59
Posts: 6
Location: Beijing
Amarbir[CDR-Labs] wrote:
Junda wrote:


Hi,
PM me the pricing of all the boards ...

single pcs 200

_________________
Beijing Jundacheng Technology Company Limited.
Website:http://www.jundacheng.com/bbs/forum.php?mod=viewthread&tid=6047


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 10th, 2021, 21:15 
Offline
User avatar

Joined: September 7th, 2021, 2:59
Posts: 6
Location: Beijing
Amarbir[CDR-Labs] wrote:
fzabkar wrote:
Junda wrote:
fzabkar wrote:
Can you leave the capacitors in place if you can ensure that the USB-SATA bridge is "quiet"? For example, if you were to short the crystal for the bridge IC, would this disable the bridge and prevent it from interfering with SATA communications?

yes,the crystal oscillator will interfere with SATA communication.

Huh?


:mrgreen: ,
He is Chinese ,He did not understand what you said ,Technically if crystal is dead usb chip is not doing anythng ,But i will stlil remove capacitors as it isolates the chip connections and provides a stable connection

Thank you.I mean that you can leave the capacitors and just to unsolder the crystal oscillator.Some of the PCB just need to unsolder crystal oscillator.Actually 800069 no need to desolder anything.And the actual situation is also related to the hard disk itself.Different drive different needs.

_________________
Beijing Jundacheng Technology Company Limited.
Website:http://www.jundacheng.com/bbs/forum.php?mod=viewthread&tid=6047


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 13th, 2021, 14:12 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3082
Location: CDRLabs @ Chandigarh [ India ]
Junda wrote:
Amarbir[CDR-Labs] wrote:
Junda wrote:


Hi,
PM me the pricing of all the boards ...

single pcs 200


Aha ,
You Said 200USD For a Unit Of This Board .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: USB to SATA probe PCB!!!
PostPosted: September 14th, 2021, 1:17 
Offline
User avatar

Joined: September 7th, 2021, 2:59
Posts: 6
Location: Beijing
Amarbir[CDR-Labs] wrote:
Junda wrote:
Amarbir[CDR-Labs] wrote:
Junda wrote:


Hi,
PM me the pricing of all the boards ...

single pcs 200


Aha ,
You Said 200USD For a Unit Of This Board .

Yes,my friend.The price set by the boss.Buying a set of 7 boards at a time can be a discount

_________________
Beijing Jundacheng Technology Company Limited.
Website:http://www.jundacheng.com/bbs/forum.php?mod=viewthread&tid=6047


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: anconaek874, Google [Bot] and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group