Still searching ... I've tried with a PCB with firmware 3.AAF and motor spins, but Computer don't recognize it.
I post a pic of the PCB.
Thanks in advance
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| In need of a PCB for a Seagate 7200.9 500GB IDE drive http://forum.hddguru.com/viewtopic.php?f=15&t=10009 |
Page 1 of 1 |
| Author: | Falken [ September 29th, 2008, 7:05 ] |
| Post subject: | In need of a PCB for a Seagate 7200.9 500GB IDE drive |
Seagate BARRACUDA 7200.9 500 Gbytes ST3500841A P/N: 9BD038-301 FIRMWARE: 3.AAD DATE CODE: 06236 SITE CODE: AMK |
|
| Author: | rameez [ September 29th, 2008, 12:28 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
Can u send pic of this pcb ? |
|
| Author: | Falken [ November 6th, 2008, 8:32 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
Still searching ... I've tried with a PCB with firmware 3.AAF and motor spins, but Computer don't recognize it. I post a pic of the PCB. Thanks in advance |
|
| Author: | rameez [ November 7th, 2008, 14:08 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
I have this pcb PM me . |
|
| Author: | will_i_am_1 [ December 12th, 2008, 11:01 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
I am in need of a PCB for seagate 7200.9 500GB firmware 3.AAJ. Any help? |
|
| Author: | will_i_am_1 [ December 14th, 2008, 18:10 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
Hello, The PCB on my drive looks exactly the same as the PCB in the picture on the forum except the large chip reads: ST(logo) MV08BB 100404195 V470BB16ETR 96608047 AA133 TWN 99 621 The PCB connector reads: FOXCONN 65N1 100327114 The label reads: S/N: 3PM1HNQH ST3500641A P/N: 9BD048-304 Firmware: 3.AAJ Date Code: 07103 Site Code: AMK Can this PCB be switched out? Thanks |
|
| Author: | RWC [ August 3rd, 2011, 12:32 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
I have a similar drive that has a fried power system (diode starts smoking when I plug the HDD into a external enclosure and power up). A few years ago I accidentally plugged in a laptop power supply (17V DC instead of the 12V DC for the external's power supply) and fried the power system. I tried switching the PCBs with a drive that had all the same specs and firmware but different interfaces (bad HDD has ATA, good drive has SATA). The new board would spin the platters, but the computer wouldn't recognize the drive. I tried sending it to a HDD recovery company but they wanted $1,000 to recover the data, even though I sent them the good drive along with the bad drive. When the drives returned the bad drive then had a damaged Inductor on the PCB rendering it further useless. Please let me know if you have any suggestions where I can purchase a PCB for this old, bad drive. Specs on the PCB/HDD are: Seagate 7200.9 ST3500641A P/N: 9BD048 - 560 Firmware: 3.AAJ Data Code: 07222 Site Code: AMK The PCB connector reads: FOXCONN 6AY1 100327114 Barcode on the PCB: 100383764 E 7719WJC7 Controller Chip: ST(logo) MV08BB 100367049 V470BB16ETR 96605038 AA194 TWN 99 617 |
|
| Author: | jpmjy [ August 3rd, 2011, 23:36 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
I have the pcb PM me. |
|
| Author: | Eric Lee [ August 5th, 2011, 0:48 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
Hi, we have this working PCB in stock, pls contact my hotmail to see if I can help or not. Thanks, Eric |
|
| Author: | adozal [ September 21st, 2011, 17:05 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
I have a similar problem and am in need of a PCB board. This is my board  Noticed the fried component just above the X in foxconn. If anyone knows what this component is I'd be interested in knowing what I killed. Specs on the PCB/HDD are: Maxtor One touch III 750 GB S/N: TB031NVC USB2/1394A The PCB connector reads: FOXCONN 64U1 100327114 Barcode on the PCB: 100406537 C 7651HLRF Controller Chip: ST(logo) MV08BB 100404195 V470BB16ETR 96608038 AA140 TWN 99 620 For now, if anyone knows where I can get a replacement, that would be awesome. |
|
| Author: | adozal [ September 21st, 2011, 22:45 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
I forgot to mention PCB number: 100406538 REV A |
|
| Author: | pcimage [ September 22nd, 2011, 2:58 ] |
| Post subject: | Re: In need of a PCB for a Seagate 7200.9 500GB IDE drive |
It's a TVS. Search for it on this forum and you'll have your answer! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|