| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Need PCB: Seagate ST360015A 9W4003-301 3.31 http://forum.hddguru.com/viewtopic.php?f=15&t=11148 |
Page 1 of 1 |
| Author: | nabeshima [ January 30th, 2009, 9:14 ] |
| Post subject: | Need PCB: Seagate ST360015A 9W4003-301 3.31 |
Hi all, I'm looking for a PCB of Seagate Barracuda V 60GB: Model: ST360015A P/N: 9W4003-301 Config: AYI-01 Firmware: 3.31 Thanks |
|
| Author: | rameez [ February 1st, 2009, 14:02 ] |
| Post subject: | Re: Need PCB: Seagate ST360015A 9W4003-301 3.31 |
I have this one PM me . |
|
| Author: | cheadledatarecovery [ July 14th, 2009, 10:04 ] |
| Post subject: | Re: Need PCB: Seagate ST360015A 9W4003-301 3.31 |
Hi there, I'm in need of this PCB too. Do you still have it? All the best, John |
|
| Author: | pcimage [ July 14th, 2009, 11:25 ] |
| Post subject: | Re: Need PCB: Seagate ST360015A 9W4003-301 3.31 |
Whats up with the original PCB? I have several ATA V PCB's with slightly different FW that may well work with a ROM swap. PM me if interested. Sean |
|
| Author: | networkpc3000 [ July 14th, 2009, 11:29 ] |
| Post subject: | Re: Need PCB: Seagate ST360015A 9W4003-301 3.31 |
hi John, would you like to send me the high quality images of your PCB both side to me by email? i have lots of hard drive resource for sell. thanks. |
|
| Author: | Eric Lee [ July 15th, 2009, 1:12 ] |
| Post subject: | Re: Need PCB: Seagate ST360015A 9W4003-301 3.31 |
Hi, John Pls send your high quality picture of both side of the PCB to my hotmail so that I could match what you need. Thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|