| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WANTED: Seagate PCB for Swap http://forum.hddguru.com/viewtopic.php?f=15&t=11627 |
Page 1 of 1 |
| Author: | boister77 [ March 17th, 2009, 15:25 ] |
| Post subject: | WANTED: Seagate PCB for Swap |
hello everyone. due to a recent house fire, a good number of my hard drives have damaged/burnt logic boards. before attempting to send them off for professional recovery, i'd like to attempt a logic board swap if possible with these drives. i'm currently researching, but i'd figured i'd start to look for pcb in advance. the labels are partially burned, so i'll post the information that i can read. Drive 1: Seagate Barracuda 7200.11 1TB S/N: 9QJ09FKH P/N: 9BX158-568 or 9BXT58-568 Firmware: SD35 Date Code: 08307 Site Code: KBATSG or K8ATSG or KRATSG Drive 2: Seagate Barracude 7200.8 400GB PCB number: 100335769 F 7532JWE4 Label on HDA near spindle motor: A55275DDAAA 7Z652 3D Thanks in advance! |
|
| Author: | networkpc3000 [ March 18th, 2009, 12:10 ] |
| Post subject: | Re: WANTED: Seagate PCB for Swap |
hello, please send images of your PCB both side to my email if you would like to do it. sunnydreamspace@hotmail.com. thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|