| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Seagate 1.5 terrabyte - looking for a pcb http://forum.hddguru.com/viewtopic.php?f=15&t=12908 |
Page 1 of 1 |
| Author: | zdbrad [ August 3rd, 2009, 19:05 ] |
| Post subject: | Seagate 1.5 terrabyte - looking for a pcb |
I've taken a photo of both sides of the board and if you have one you think will match, please let me know and I can send the photos. Thanks |
|
| Author: | zdbrad [ August 3rd, 2009, 19:08 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
The model # is ST31500341AS |
|
| Author: | drc [ August 4th, 2009, 0:02 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
why not post your photos here? |
|
| Author: | pcimage [ August 4th, 2009, 6:28 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
You do realise a PCB swap won't work? Unless you physically move the ROM. |
|
| Author: | Eric Lee [ August 4th, 2009, 8:43 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
Hi, Would you like to send me the high quality picture of both side of your PCB so that we could match what you need? Thanks Eric |
|
| Author: | zdbrad [ August 5th, 2009, 10:08 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
PcImage - No, I didn't realize a pcb swap would not work. I've been doing some searching online to get more info about the ROM... do you have any sites you can point me to that explains more? Thanks And thanks Eric, I've already found a pcb. |
|
| Author: | pcimage [ August 5th, 2009, 11:19 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
It's a 8-legged chip with p/n something like "25P40VP" |
|
| Author: | pcrecovery [ August 5th, 2009, 13:21 ] | ||
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb | ||
Looks similar to this
|
|||
| Author: | Eric Lee [ August 6th, 2009, 0:13 ] |
| Post subject: | Re: Seagate 1.5 terrabyte - looking for a pcb |
Hi, pcrecovery We got your working PCB for sale, pls send the full side pic of both side of your PCB to my hotmail so that we could match more well. Thanks Eric |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|