Page 1 of 1
Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 2nd, 2009, 16:22
by koolzero
Hi, I'm new to the forum. I'm searching for a board for a Hitachi Deskstar with a P/N 13G0254 and a date of May - 2005. Thanks for any help!
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 2nd, 2009, 16:54
by koolzero
A few more things. Printed on back next to sata connector is "assembly made in Malaysia". There is a big Infineon chip on the board. 0A29243 BA 1327 Xzx5161DCR is stamped in on the left bottom corner of the drive on top of the power adapter. Also stamped on the board is F 13G0208 01
S/N: CDF44ZWE
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 2nd, 2009, 22:39
by Eric Lee
Hi,
Would you like to send a high quality picture of front side of your PCB to my hotmail so that we could match what you need?
Thanks
Eric
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 3rd, 2009, 7:15
by koolzero
Here are some pictures.
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 3rd, 2009, 11:40
by koolzero
I don't want to spend more than $10 bucks on a board, I am just hoping that someone has a junked drive with a good board that they are wanting to sell for cheap. I already got the data off I just hate to throw the drive away.
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 3rd, 2009, 13:14
by drc
Probably not going to happen.
Looks like your SATA plug is broken, if that's the only problem I'd recommend modifying a SATA cable by jamming some paper or something in the end to make contact. Replacing the PCB is not really a feasible solution, especially in your price range.
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 3rd, 2009, 13:18
by koolzero
drccsc wrote:Probably not going to happen.
Looks like your SATA plug is broken, if that's the only problem I'd recommend modifying a SATA cable by jamming some paper or something in the end to make contact. Replacing the PCB is not really a feasible solution, especially in your price range.
Yep that's what happened. I wish I didn't throw away the plastic part I could probably have hot glued the connector. I was hoping to find a cheap board. I guess I will just punt and buy a new drive. I can sell this one for parts!
Thanks!
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 4th, 2009, 14:35
by koolzero
I got an email back from Eric Lee saying they can sell a board for $9 USD plus shipping, but I was told I need to remove the bios from this board and re-solder it to the donor board. Why would this be necessary, shouldn't the new board work if it's off the same drive and same part number?
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 4th, 2009, 16:03
by drc
Nope, thats how these things work.
Surprisingly low price there too.
Re: Need board for Hitachi Deskstar HDS722516VLSA80 P/N 13G0254
Posted: September 4th, 2009, 22:05
by Eric Lee
koolzero wrote:I got an email back from Eric Lee saying they can sell a board for $9 USD plus shipping,
Hi, $9 did not plus shipping cost, pls re-read my email carefully.
Thanks
Eric