HDD GURU FORUMS

Hi All,

I'm looking to PCB swap my Hitachi Travelstar laptop drive:

Model:
HTS428040F9AT00

A/A0A2 A/A

CYL16383- H16 S63

9LHHA358K466

I don't know what all those numbers are, but I'll take a photo and attach it when I get home.

Thanks,
Chris

Dear Chris,
please lt me know the PCB code of your PCB. would you like to send it to me email? by the way. you subject make me confuse at first time.

Hi, Chris,

Could you pls let me know the numbers of the white label of back side of your PCB so that we could match what you need.

Thanks
Eric

I'm always going through these for surplus, let me see if I can find a mate.

Thanks for the replies, I appreciate it. Pictures coming shortly. In the meantime, here is the information on the white sticker on the PCB:

*2P00F6P4C50038ZD21005* SH334

Pictures coming shortly if necessary ..

Thanks!
Chris

Here are some photos! I appreciate any leads. Thanks.

Hi, Chris,

We have this working PCB after checking your photo, pls contact my hotmail.

Thanks
Eric

Hello,

Thanks Eric, the PCB arrived today. I was surprised how quickly it got here. Unfortunately the board swap isn't working for me. I'll post in the main forum my results and see if anyone has some suggestions.

Chris

Hi, Chris,

It's my pleasure, and pls note that the PCB was tested in good working condition by our engineer before we shiped them out.

So I think the pronlem of your HDD was not from you PCB. Pls post more informations here to see if someone or some pro can help you out.

Thanks
Eric

hi,
i have PCB for sell with support.

Eric Lee wrote:Hi, Chris,

It's my pleasure, and pls note that the PCB was tested in good working condition by our engineer before we shiped them out.

So I think the pronlem of your HDD was not from you PCB. Pls post more informations here to see if someone or some pro can help you out.

Thanks
Eric

Hi Eric! I'm sure the PCB is / was in good working order when it left. Based on some of the markings on the IC chips, I think there is still a firmware mismatch. IC5 on my PCB is "MC62" and IC5 on the replacement you sent is "MC60" I think I need a board where IC5 is "MC62" ..

Thanks,
Chris

Hello..

i hope it is right PCB for your HDD