HDD GURU FORUMS
http://forum.hddguru.com/

WD800BB-75BSA0 drive or PCB
http://forum.hddguru.com/viewtopic.php?f=15&t=13999
Page 1 of 1

Author:  otscomm [ November 19th, 2009, 0:31 ]
Post subject:  WD800BB-75BSA0 drive or PCB

I have a WD800BB-75BSA0 drive made in Malaysia. Manufacturing date is June 10, 2001. The drive won't spin up. The logic board number is 2060-001062-004. There are a lot of boards out there for WD800BB drives, all different! I hope to replace the defective chip and recover the data. I am assuming drives made in Malaysia within this time period, have a good chance of having a compatible board. Just putting this out hoping to get lucky.

Author:  pcimage [ November 22nd, 2009, 11:20 ]
Post subject:  Re: WD800BB-75BSA0 drive or PCB

You'll have to be VERY lucky to get a match without swapping over the ROM chip.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/