WANTED PCA FOR WD800JD - 00LUA0; PCB 2060-701335-003 REV B

[al3x]

WANTED PCA FOR WD800JD - 00LUA0; PCB 2060-701335-003 REV B

OR SAME HARD DRIVE OR ANY OTHER CAPABLE PCB

Paying by paypal

[networkpc3000]

hi,
i have this PCB for sell. please contact me by email. thanks.

[Eric Lee]

Hi,

We have this working PCB in stock, pls contact my hotmail to see if I can help.

Thanks
Eric

[al3x]

Hi anyone else have it?

[fzabkar]

What's wrong with the original?

Can you upload a detailed photo of the component side?

[tcolaco]

Hello

I have 2 of this pcbs

2060-701335-003 REV B - just pcb 60$
and
2060-701335-003 REV A - the drive 80$


If you need one of this you can contact me.

Regards

[al3x]

just no HD in bois, no strange noises ,probably PCB dead

i will buy HD for 60$ thanks

just need to get cheap pcb, to take out some data and then i goes to trash

[fzabkar]

The PCB contains calibration data that are specific to your drive. You will be lucky if a direct PCB swap works. You will most likely need to transplant the serial EEPROM chip from patient to donor. Some boards have the data inside the main MCU. In these cases a DIY job is unfeasible.

The rule of thumb appears to be that, if a drive spins up but is not detected, or if it tries to spin up, then the board is probably OK. Instead the problem is most likely with the head/disc assembly (HDA). If, OTOH, the drive makes no noise at all, and does not attempt to spin up, then the board is probably faulty.

[al3x]

Thanks for advice, i still want to try

[bhilwara.ashok]

Hello

I have 2 of this pcbs

2060-701335-003 REV B - just pcb 60$
and
2060-701335-003 REV A - the drive 80$


If you need one of this you can contact me.

Regards