HDD GURU FORUMS
http://forum.hddguru.com/

Wanted PCB WD1600JB
http://forum.hddguru.com/viewtopic.php?f=15&t=15255		 Page 1 of 1
Author:  longie13 [ March 26th, 2010, 19:58 ]
Post subject:  Wanted PCB WD1600JB
I'm looking for a PCB for A WD1600JB - 22REA0 DCM:DSBHCTJAH.
The Sticker on PCB says 2061-701292-C00 AA
The Actual Board has 2060-701292-001 REV A
Author:  networkpc3000 [ March 26th, 2010, 22:11 ]
Post subject:  Re: Wanted PCB WD1600JB
hi,
i have this PCB in stock. please contact me by email or MSN if need. thanks.
Author:  Eric Lee [ March 27th, 2010, 5:55 ]
Post subject:  Re: Wanted PCB WD1600JB
Hi,

We have this working PCB in stock too, pls contact my hotmail.

Thanks
Eric
Author:  longie13 [ March 28th, 2010, 3:23 ]
Post subject:  Re: Wanted PCB WD1600JB
I was told maybe I should post a pic of my board. So here it is maybe it's not even savable!

Attachments:
File comment: Rear of board
DSC00446.JPG
DSC00446.JPG [ 2.53 MiB | Viewed 6371 times ]
File comment: Burnt Chip
DSC00444.JPG
DSC00444.JPG [ 2.29 MiB | Viewed 6371 times ]
File comment: Burnt Chip
DSC00443.JPG
DSC00443.JPG [ 2.65 MiB | Viewed 6371 times ]
File comment: Front View
DSC00437.JPG
DSC00437.JPG [ 2.48 MiB | Viewed 6371 times ]
Author:  fzabkar [ March 28th, 2010, 18:40 ]
Post subject:  Re: Wanted PCB WD1600JB
The SMOOTH chip is the motor controller. I would check the motor windings for shorts with a multimeter. There appear to be three phases and a common terminal.

You will also need to transplant the EEPROM chip at U12 from patient to donor. This chip stores unique, drive specific calibration data.
Author:  Eric Lee [ March 28th, 2010, 22:56 ]
Post subject:  Re: Wanted PCB WD1600JB
Agreed ^^
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/