| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Wanted Western Digital 1TB WD10EADS-00L5B1 PCB http://forum.hddguru.com/viewtopic.php?f=15&t=15265 |
Page 1 of 1 |
| Author: | tborg84 [ March 28th, 2010, 3:19 ] |
| Post subject: | Wanted Western Digital 1TB WD10EADS-00L5B1 PCB |
Hi is there anyone willing to help me out. My PCB's chip has fried I need the pcb from a WD10EADS-00L5B1 DATE: 11 MAR 2009 DCM: DANNT2MAN PCB: REVA 2060-701590-000 Made in Thailand Attachment: IMG_1896.JPG [ 1.18 MiB | Viewed 11541 times ] Attachment: IMG_1903.JPG [ 1.13 MiB | Viewed 11541 times ] Attachment: IMG_1904.JPG [ 1.1 MiB | Viewed 11541 times ] Attachment: IMG_1905.JPG [ 1.87 MiB | Viewed 11541 times ] Attachment: IMG_1906.JPG [ 1.06 MiB | Viewed 11541 times ] |
|
| Author: | harddrivespecialist [ March 28th, 2010, 10:38 ] |
| Post subject: | Re: Wanted Western Digital 1TB WD10EADS-00L5B1 PCB |
This is unusually big burn on a controller chip. Big chance of Processor damage and a preamp damage. |
|
| Author: | networkpc3000 [ March 28th, 2010, 18:46 ] |
| Post subject: | Re: Wanted Western Digital 1TB WD10EADS-00L5B1 PCB |
hi, i have this PCB in stock and could help you program firmware into PCB. as just swap PCB won't help any more. had to program firmware into PCB matching with firmware which stock in platters. i guess head and MCU(PCB processor) are fine. |
|
| Author: | Eric Lee [ March 28th, 2010, 22:55 ] |
| Post subject: | Re: Wanted Western Digital 1TB WD10EADS-00L5B1 PCB |
Hi, We have this working PCB in stock too, pls contact my hotmail. Thanks Eric |
|
| Author: | Skizoboy [ April 17th, 2010, 20:21 ] |
| Post subject: | Re: Wanted Western Digital 1TB WD10EADS-00L5B1 PCB |
Same burn on the same chip of the same board WD10EADS-0L5B1 (2061-701590-J00 AA) I read this can be replaced? I own an empty WD10EADS-22M2B0 (2061-701640-202 04PD2), can I swap boards? Thanks in advance |
|
| Author: | networkpc3000 [ April 17th, 2010, 22:22 ] |
| Post subject: | Re: Wanted Western Digital 1TB WD10EADS-00L5B1 PCB |
networkpc3000 wrote: hi, i have this PCB in stock and could help you program firmware into PCB. as just swap PCB won't help any more. had to program firmware into PCB matching with firmware which stock in platters. i guess head and MCU(PCB processor) are fine. hi, please read it. i have both model of PCB in stock and can handle this operation. please contact me by email or MSN if need help. just simple won't help any more. thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|