| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Wanted WD10EAVS-00D7B0 http://forum.hddguru.com/viewtopic.php?f=15&t=15926 |
Page 1 of 1 |
| Author: | louisloo99 [ May 28th, 2010, 4:49 ] |
| Post subject: | Wanted WD10EAVS-00D7B0 |
Hi Anybody has this Western Digital Cavair 1.0TB Model No. WD10EAVS-00D7B0 DCM HHNNHV2MFB R/N 701537 Date: 03 June 2008 Pls PM me if you have. Tks Louis |
|
| Author: | harddrivespecialist [ May 28th, 2010, 9:48 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
You need a whole drive or PCB? |
|
| Author: | networkpc3000 [ May 28th, 2010, 23:28 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
hi, i can help. please contact me by email or MSN if need. thanks. |
|
| Author: | Eric Lee [ May 29th, 2010, 0:25 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
Hi, We have this kinds of working PCB in stock, but for this kinds of PCBs, you need to reprogram rom in main chip. Thanks Eric |
|
| Author: | louisloo99 [ May 29th, 2010, 6:29 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
harddrivespecialist wrote: You need a whole drive or PCB? i'm looking for the whole drive with the PCB..my first Data Recovery project... |
|
| Author: | harddrivespecialist [ May 29th, 2010, 10:40 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
louisloo99 wrote: harddrivespecialist wrote: You need a whole drive or PCB? i'm looking for the whole drive with the PCB..my first Data Recovery project... Good luck! |
|
| Author: | networkpc3000 [ May 30th, 2010, 20:05 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
hi, please contact me by email. i need more detail and i could help. thanks. |
|
| Author: | louisloo99 [ June 19th, 2010, 3:00 ] | ||
| Post subject: | Re: Wanted WD10EAVS-00D7B0 | ||
Dear All My friends advise that I should look for the PCB replacement, not the whole drive. Kindly advise if you have this replacement..for WD10EAVS-00D7B0. PCB No. 2060 701537 004 REV A pls post reply or PM me. Tks Louis
|
|||
| Author: | fzabkar [ June 19th, 2010, 3:31 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
louisloo99 wrote: My friends advise that I should look for the PCB replacement, not the whole drive. Read this thread: verbatim-western-digital-1tb-ext-drive-not-powering-t14369.html Does your board have an 8-pin serial EEPROM chip at location U12 below the Marvell MCU (big "M")? If not, then you will probably need to transfer the internal ROM contents of the Marvell chip from patient to donor. A straight board swap won't work. There are companies offering a ROM transfer a service for $10, if you buy a PCB from them. |
|
| Author: | louisloo99 [ June 19th, 2010, 5:09 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
The EEPROM data is most probably in the MCU. I think the WD Doctor will be able to read the data in ROM and transfer the data over.. Do you use the P3000 or the Salvation Data Suite? which is better? I just need the PCB replacement. thanks |
|
| Author: | fzabkar [ June 19th, 2010, 5:20 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
louisloo99 wrote: The EEPROM data is most probably in the MCU. I think the WD Doctor will be able to read the data in ROM and transfer the data over.. Do you use the P3000 or the Salvation Data Suite? which is better? I just need the PCB replacement. thanks Sorry, I mistook you for an end user. As for the DR products, I use neither. I'm not a DR guy. |
|
| Author: | louisloo99 [ June 19th, 2010, 16:10 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
No problem fzabkar...you are just being helpful.. I am still new and appreciate all the help. Do you have the PCB that I am looking for? |
|
| Author: | fzabkar [ June 19th, 2010, 19:13 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
louisloo99 wrote: Do you have the PCB that I am looking for? No, sorry. |
|
| Author: | networkpc3000 [ June 19th, 2010, 19:19 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
hi, i have it in stock. and can help you program original FW into good PCB if you can send file of ROM data to me. |
|
| Author: | louisloo99 [ June 20th, 2010, 6:33 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
networkpc3000 wrote: i have it in stock. and can help you program original FW into good PCB if you can send file of ROM data to me. Thanks for your offer to program for me...the joy is doing it myself and troubleshooting. and getting the experience at the same time...hehe.. Can you give me a quote and also send me a high quality picture of the chips and back of the PCB.. Tks Louis |
|
| Author: | networkpc3000 [ June 20th, 2010, 19:00 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
yeah. i can. but why you had to match with chip and label? 
|
|
| Author: | louisloo99 [ June 21st, 2010, 4:26 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
actually, it is not a must...but if the chip can be the same,,better still right..because i check with another vendor, but he ask to give him the chip number also,,which i thot the same as you..why need to match the chip and the label..but i just gave him.
|
|
| Author: | networkpc3000 [ June 21st, 2010, 18:51 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
hi, sent them to you by email already. do you think vendor which you mention is pro? or just vendor only? 
|
|
| Author: | louisloo99 [ June 23rd, 2010, 7:56 ] |
| Post subject: | Re: Wanted WD10EAVS-00D7B0 |
my customer has suddenly decided to take back his disk..already more than a month..sorry guys for your trouble.. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|