PCB for a WD800 needed

[athlesi7]

i get i IDNF problem and i assume that there is a PCB problem.
the model number is : WD800JB-00CRA1
thank you

[networkpc3000]

hi,
please let me know the model of your drive. or you can contact me by email/MSN directly. thanks.

[Eric Lee]

Hi,

Pls let me know the PCB number like 2060-******-00* REV * so that we could match what you need. Pls contact my hotmail.

Thanks
Eric

[unknown]

get i IDNF problem and i assume that there is a PCB problem.

It's not the PCB.
TRANSLATOR
Use the search button above.

[athlesi7]

the number is 2061-001102-300 E.
is the translator problem fixed by changing the pcb (swapping the chip i mean)
or can it be fixed with F/W update?
thank you for your response

[unknown]

is the translator problem fixed by changing the pcb (swapping the chip i mean)

No.

or can it be fixed with F/W update?

No.

You will need a special equipement SW/HW to regenerate translator.
And the most important thing : you have to know what you are doing.
If your data is important then you have to seek for a pro. It's a strange issue for you, but DR company/man doing this almost everyday.

good luck

[rzr]

can you tell more on this "special equipement" ?

ps: got IDNF too

[unknown]

can you tell more on this "special equipement" ?

ps: got IDNF too

ATOLA Insight / PC3K / SD tools .... etc

What's your HDD model ?

[rzr]

What's your HDD model ?

WD400BB-00CCB0


seems to be a translator issue too

see the logs about it :
http://rzr.online.fr/q/ata

[unknown]

PM sent.

[rzr]

many thx ...

I wish i could do this from linux , but I managed to boot a livecd of windows and reset the translator now i'm dumping a broken partition w/ ext3 fs

while i am here do you know if this device has issues w/ SMART capabilities I cant manage to set it back ...