| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Wanted Seagate ST380211as HDD or PCB http://forum.hddguru.com/viewtopic.php?f=15&t=16263 |
Page 1 of 1 |
| Author: | mrfixitlondon [ July 1st, 2010, 6:19 ] |
| Post subject: | Wanted Seagate ST380211as HDD or PCB |
I am after a HDD or PCB 100395316 REV B for a Seagate ST380211as Firmware 3.AAE Date Code 07081 Site WU Can anyone help. I am located in London UK Many thanks Steve |
|
| Author: | networkpc3000 [ July 1st, 2010, 19:50 ] |
| Post subject: | Re: Wanted Seagate ST380211as HDD or PCB |
hi, i have it in stock. please contact me by email or MSN if need. thanks. |
|
| Author: | Eric Lee [ July 1st, 2010, 21:18 ] |
| Post subject: | Re: Wanted Seagate ST380211as HDD or PCB |
Hi, We have this working PCB in stock too, pls contact my hotmail. Thanks Eric |
|
| Author: | mrfixitlondon [ July 2nd, 2010, 8:39 ] |
| Post subject: | Re: Wanted Seagate ST380211as HDD or PCB |
Please see attached images of HDD and PCB The TVS's are OK Will I need to change the ROM chip over with this PCB, If so which IC is it thanks steve ![]()
|
|
| Author: | networkpc3000 [ July 2nd, 2010, 15:08 ] |
| Post subject: | Re: Wanted Seagate ST380211as HDD or PCB |
please attach again. |
|
| Author: | mrfixitlondon [ July 5th, 2010, 18:33 ] |
| Post subject: | Re: Wanted Seagate ST380211as HDD or PCB |
Can anyone tell me if I need to swap the ROM chip with this drive, if so which chip is it on the PCB thanks steve |
|
| Author: | networkpc3000 [ July 5th, 2010, 18:53 ] | ||
| Post subject: | Re: Wanted Seagate ST380211as HDD or PCB | ||
hi, here you go. normal ROM chip model is 25FXXXX 8 Pins chip. good luck!
|
|||
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|