HDD GURU FORUMS

Any body know where i can purcahse ce-ata to ide - to be used with hs161jq type drives
thanks

One comes with PC3000, I know that much.

So nobody here can recover data from a CEATA hdd.. nice.

Ill just go and buy an EEEPC...

<grumbles>

http://forum.hddguru.com/ata-adaptors-available-t12764.html

2009 - no solution..

but now..

Germany, Austria, Switzerland,Italy, Belguim
TRIAS Mikroelektronik GmbH
Moerser Landstrasse 408
47802 Krefeld
Germany
Tel : +49-2151-95301-0
Fax: +49-2151-95301-15
Email: info@trias-mikro.de

UK, Ireland, France, Spain, Portugal, Norway
EDA4YOU
Salbeiweg 65
76149 Karlsruhe
Germany
Tel: +49-721-66 37 922
Fax: +49-721-66 37 921
Email: info@eda4you.eu

Finland, Sweden, Denmark
TRIAS Mikroelektronik GmbH
Moerser Landstrasse 408
47802 Krefeld
Germany
Tel : +49-2151-95301-0
Fax: +49-2151-95301-15
Email: info@trias-mikro.de

Russia, Poland, Romania
TRIAS Mikroelektronik GmbH
Moerser Landstrasse 408
47802 Krefeld
Germany
Tel : +49-2151-95301-0
Fax: +49-2151-95301-15
Email: info@trias-mikro.de

Israel
Arasan Chip Systems, Inc.
2010 North First Street,
Suite 510, San Jose
CA 95131, USA
Tel: +1-408-282-1600
Fax: +1-408-282-7800
Email: sales@arasan.com

Anyone who owns a PC3000 UDMA can recover data from it. The adapter comes with a purchase of UDMA

If you're just doing logical recovery, could you make do with something like the following?

StarTech IDE1810U2Z Aluminum 1.8" USB 2.0 External Hard Drive Enclosure:
http://www.startech.com/item/IDE1810U2Z ... osure.aspx

Thanks for the link fzabkar- it says ceata zif/lif ; but there is no picture inside to actaully show whether its the smaller in width cable than the ordinary one.

I shall call e-buyer(uk associate of that site)- maybe somebody will be able to tell me. It should be good for use with logical recovery..
Or ill just buy it and see.

hi,
if you just need external enclosure i have cheap one in stock.

At least some of these drives are not CE-ATA

Hi, Do you need the 1.8" CE ATA to 3.5" IDE and 2.5" adapter? If so, I have it,

Thanks,
Eric

Ah at last!

Its like this is it?

The zif cables are the ones you can buy everywhere for like the 1.8" Toshiba Apple drives or another.

Please notice this Samsung is almost 1/3 of the size and its CE technology.

Thanks.

Hey ppumkin - is that what you need (see attached photo)

Ahh thanks Mate!!

PS Its not MMC- its actually sata..

Good tip anonymous!


PS This forum is da bomb with help!

Thanks for the help...

If you need one pm me.

I do not think this is accurate

What is not accurate- the MMC part or the SATA part.

Or both?

Do you have the pinouts for YPM09657 Marvel chip?

The SATA part. Samsung's data sheet clearly states that hs161jq has a CE-ATA interface which is based on MMC. That said, there is a think-outside-the-box solution that does not require adapters at all...

I know- that's what i have been following the whole time after MMC. That's why this sata plug surprised me.

God. why is my box so blingin big...

Only thing i can think is use the ATA version of the pcb. But i assume that is not straightforward swap either..

that's ZIF ATA/100 if you got an IPod replace the drive , IPod usb connection works as ATA convertor .
you might need a $20 micro sata => normal sata depending on your recovery case .
Those ZIF connectors on pcb are mostly designed for max 15 time connect/disconnect.

if you got the drive orginal ZIF cable then its only a 5$ convertor





http://www.drivestar.org/product/converter/converter.htm

That is for regular ZIF. CE-ATA is different.