Hi there,
I am looking for a PCB for this drive so I can move the NVRAM to the new board and try to recover the data off the drive.
I only have the top of the external case and all it has is a Lacie logo and: Design by F.A. Porsche
There is also a sticker on the top side of the back panel: 1046611011364CR 3U2
The PCB inside the external case has this on it:
RD289B-A
M28V0
0639
Top sticker on the drive:
Hitachi Deskstar
Model: HDT722525DLAT80
ATA/IDE
LES
Capacity: 250G
RPM: 7200rpm
P/N: 0A31611
MLC: BA1769
LBA: 488,397,168
CHS: 16383/16/63
0A31611BA17690S6A
S/N: T8CD11RH
White Sticker on bottom edge near IDE cable:
0A29476
BA1588_
Xzn638
15D8
MCU:
Infineon
0A29480
UAB-M3057-HTV
V4 ROM
FR KR SI
EL610157EA7
G0634
White sticker in middle of motor:
13G0832
228
6403
B510WH
Related forum post with pics and diagnostics(thanks to fzabkar
hitachi-deskstar-hdt722525dlat80-spin-t18986.html
Thank you!