| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Looking for wd2500js-22mhb0 please help ( photos inside ) http://forum.hddguru.com/viewtopic.php?f=15&t=19719 |
Page 1 of 1 |
| Author: | NetCaster [ June 15th, 2011, 15:56 ] |
| Post subject: | Looking for wd2500js-22mhb0 please help ( photos inside ) |
Hi i am looking to recover data from this harddisk some adviced me to replace the PCB with the same model my HDD is wd2500js-22mhb0  PCB label is 2061-701335-C00 ADD4 XT 2W07 XRJT 4 0004170 6 174  i hope you can help me guys this contain very important data Thanks all |
|
| Author: | fzabkar [ June 16th, 2011, 4:29 ] |
| Post subject: | Re: Looking for wd2500js-22mhb0 please help ( photos inside ) |
You are probably not going to be able to "recover data" with a straight PCB swap. If this is your board ... http://ep.yimg.com/ca/I/yhst-1443758497 ... 60_3865366 ... then you will need to transfer the 8-pin serial flash memory chip at location U12 from patient to donor. This chip stores unique, drive specific "adaptive" information. Some board suppliers include a firmware transfer or ROM transfer service for US$10 - $20: http://www.hdd-parts.com/20091010.html |
|
| Author: | thatdellguy [ June 16th, 2011, 6:18 ] |
| Post subject: | Re: Looking for wd2500js-22mhb0 please help ( photos inside ) |
Before we get way out of hand with crazy DIY suggestions/forum spam, who opened it? 
|
|
| Author: | labtech [ June 16th, 2011, 6:32 ] |
| Post subject: | Re: Looking for wd2500js-22mhb0 please help ( photos inside ) |
And why did they open it? |
|
| Author: | lcoughey [ June 16th, 2011, 10:28 ] |
| Post subject: | Re: Looking for wd2500js-22mhb0 please help ( photos inside ) |
As it looks like they made no effort to clean the drive's exterior before opening, I can only imagine the contamination on the inside after opening it. |
|
| Author: | Eric Lee [ June 20th, 2011, 9:14 ] |
| Post subject: | Re: Looking for wd2500js-22mhb0 please help ( photos inside ) |
Hi, we have this working PCB in stock, pls contact my hotmail to see if I can help or not. Thanks, Eric |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|