Hi

i am looking to recover data from this harddisk some adviced me to replace the PCB with the same model

my HDD is wd2500js-22mhb0



PCB label is 2061-701335-C00 ADD4 XT 2W07 XRJT 4 0004170 6 174



i hope you can help me guys this contain very important data

Thanks all

You are probably not going to be able to "recover data" with a straight PCB swap.

If this is your board ...

http://ep.yimg.com/ca/I/yhst-1443758497 ... 60_3865366

... then you will need to transfer the 8-pin serial flash memory chip at location U12 from patient to donor. This chip stores unique, drive specific "adaptive" information.

Some board suppliers include a firmware transfer or ROM transfer service for US$10 - $20:
http://www.hdd-parts.com/20091010.html

_________________
A backup a day keeps DR away.

Before we get way out of hand with crazy DIY suggestions/forum spam, who opened it?

_________________
Buy your friends Toshiba\Hitachi and your enemies Seagate.

And why did they open it?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

As it looks like they made no effort to clean the drive's exterior before opening, I can only imagine the contamination on the inside after opening it.

_________________
Luke
Recovery Force Data Recovery

Hi, we have this working PCB in stock, pls contact my hotmail to see if I can help or not.

Thanks, Eric

_________________
Provided HDD PCBs and donor HDD, Real in stock
eric_lee8341@hotmail.com