Touchclarity wrote:
You can have my SD for a fair price if you want it..... never used...
Steve..
PM me if interested...
Steve..
PM me if interested...
PM's in your inbox
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Looking for a magnet exchanger http://forum.hddguru.com/viewtopic.php?f=15&t=20190 |
Page 1 of 1 |
| Author: | northwind [ August 5th, 2011, 6:52 ] |
| Post subject: | Looking for a magnet exchanger |
Hi all Looking to buy a magnet exchanger for 3.5" I have salvations' HPE Pro (which includes an exchanger) but somehow i managed to lose it. Anyone willing to sell their one, spare one? Cheers. |
|
| Author: | Jar [ August 5th, 2011, 7:56 ] |
| Post subject: | Re: Looking for a magnet exchanger |
http://www.cprtools.net/store/index.php ... ucts_id=62 |
|
| Author: | northwind [ August 5th, 2011, 9:00 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Thanks! |
|
| Author: | Touchclarity [ August 5th, 2011, 9:16 ] |
| Post subject: | Re: Looking for a magnet exchanger |
You can have my SD for a fair price if you want it..... never used... Steve.. PM me if interested... |
|
| Author: | northwind [ August 9th, 2011, 15:33 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Touchclarity wrote: You can have my SD for a fair price if you want it..... never used... Steve.. PM me if interested... PM's in your inbox
|
|
| Author: | northwind [ August 14th, 2011, 12:23 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Still looking for this. CPRTools requires a $120 for shipping which is insane (I think). I asked them if there is an option they could send it to us with normal registered air-mail instead (to save shipping cost), and they didn't even reply. If anyone has a spare one, let me know plz. Thanks. |
|
| Author: | Nick_CT [ August 19th, 2011, 8:21 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Their video advert is hilarious! That American accent is straight out of a 'sign up for the army' commercial. Do you really feel the need for it? With the right set of quality pliers in your toolset I can't see a requirement for that type of product. |
|
| Author: | buster80 [ August 19th, 2011, 8:54 ] |
| Post subject: | Re: Looking for a magnet exchanger |
I have both CPR magnets, PM me thanks andy |
|
| Author: | northwind [ August 22nd, 2011, 4:24 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Nick_CT wrote: Their video advert is hilarious! That American accent is straight out of a 'sign up for the army' commercial. Do you really feel the need for it? With the right set of quality pliers in your toolset I can't see a requirement for that type of product. You're absolutely right. But i was kinda used in working with that tool, so i feel more comfy using it. |
|
| Author: | northwind [ August 22nd, 2011, 4:24 ] |
| Post subject: | Re: Looking for a magnet exchanger |
buster80 wrote: I have both CPR magnets, PM me thanks andy PM'd. Ta. |
|
| Author: | northwind [ August 31st, 2011, 9:35 ] |
| Post subject: | Re: Looking for a magnet exchanger |
I am still looking for this. Anyone? I hate pliers 
|
|
| Author: | Nick_CT [ August 31st, 2011, 16:59 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Get some nice quality, thin nose with serrations so they grip well I've got about 5 different types in my toolset, there's always one right for the job.
|
|
| Author: | northwind [ September 1st, 2011, 3:22 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Hi Nick. Can you suggest a toolset i could look at? Perhaps the reason i insist on the exchanger is because my pliers weren't the right ones after all. |
|
| Author: | Nick_CT [ September 1st, 2011, 5:11 ] |
| Post subject: | Re: Looking for a magnet exchanger |
I didn't buy a 'set' so to speak, I bought them individually as I found them. Hardware shops and hobby shops are good places to find them if you look around. The thin needle-nose ones with serrations and a flat end I use the most. Also have some slightly larger ones with a very thin, flat serrated end that are great to use on 3.5" magnets. Come to think about it I probably have about 10 altogether, have stopped collecting now that I've found the ones right for the job. |
|
| Author: | Touchclarity [ September 2nd, 2011, 13:21 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Try these http://www.machinemart.co.uk/shop/product/details/facom-420-e-gripping-pliers These are really well made and excellent to use, not only thin nosed but flat as well, gets right underneath and the large handles give lots of control. 
|
|
| Author: | northwind [ September 5th, 2011, 4:06 ] |
| Post subject: | Re: Looking for a magnet exchanger |
Thanks for the suggestion. I have ordered these
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|