| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| I need someone to do a rom transfer on wd1600bevs drive http://forum.hddguru.com/viewtopic.php?f=15&t=20269 |
Page 1 of 1 |
| Author: | MrAndersons [ August 13th, 2011, 12:14 ] | |||
| Post subject: | I need someone to do a rom transfer on wd1600bevs drive | |||
I have ordered a donor drive for my wd1600bevs, but there is no u12 chip on the PCB. The info is stored on the cpu of the board, and I do not have a pc3000 to transfer the rom to the new donor board. Could someone in the US with a pc3000 do this for me? Please email me your price and turn-around-time. Thanks,
|
||||
| Author: | lcoughey [ August 13th, 2011, 20:58 ] |
| Post subject: | Re: I need someone to do a rom transfer on wd1600bevs drive |
What is the problem with the drive? There is more to reprogramming a donor than just owning PC3000. |
|
| Author: | MrAndersons [ August 13th, 2011, 21:32 ] |
| Post subject: | Re: I need someone to do a rom transfer on wd1600bevs drive |
The drive is not recognized in bios or DDI. It makes a few quiet clicks and powers off. I would like to swap the PCB with a donor PCB as my first step, but I cannot swap the rom because its stored on the processor on the board. |
|
| Author: | thatdellguy [ August 14th, 2011, 4:14 ] |
| Post subject: | Re: I need someone to do a rom transfer on wd1600bevs drive |
What does your Scott Moulton distance learning guide say to do in these circumstances? what-certification-scott-moulton-offering-his-course-t19566.html#p131586 |
|
| Author: | MrAndersons [ August 14th, 2011, 9:41 ] |
| Post subject: | Re: I need someone to do a rom transfer on wd1600bevs drive |
Stay on the topic. Either you can help me or not. I'm looking to outsource pcb rom swap since I don't have the tools to do it. |
|
| Author: | MrAndersons [ August 15th, 2011, 14:44 ] |
| Post subject: | Re: I need someone to do a rom transfer on wd1600bevs drive |
The PCB turned out to be ok. I replaced the head assembly with my donor drive and now the DDI is imaging it. Thanks for the input, I would have thought it was the PCB! |
|
| Author: | labtech [ August 15th, 2011, 19:27 ] |
| Post subject: | Re: I need someone to do a rom transfer on wd1600bevs drive |
It's all about the diagnostic |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|