| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Need a PCB for a Fujitsu 80gb hdd http://forum.hddguru.com/viewtopic.php?f=15&t=20768 |
Page 1 of 1 |
| Author: | jsulli2012 [ October 10th, 2011, 1:34 ] |
| Post subject: | Need a PCB for a Fujitsu 80gb hdd |
I have a Fujitsu 80gb hdd model:mhw2080bh pl part no:ca06820-b39200ap Number on PCB is: ca26343-b84304ba I was wondering if anyone knew where I could find a PCB for my hdd. My hdd is making a clicking sound and I figured I could try to swap out PCB and see if that will fix the problem. |
|
| Author: | northwind [ October 10th, 2011, 8:06 ] |
| Post subject: | Re: Need a PCB for a Fujitsu 80gb hdd |
Your assumption is probably wrong. If drive spins up and clicks, then most probably there is absolutely no problem with your pcb. Clicking could mean bad heads or some other problem like corrupted firmware. Both these are not DIY and you should consider sending disk to a pro in your area. If data is important, that is. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|