View topic - Need a PCB for a Fujitsu 80gb hdd

Main » Forums home » Market

All times are UTC - 5 hours [ DST ]

Need a PCB for a Fujitsu 80gb hdd

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

jsulli2012

Post subject: Need a PCB for a Fujitsu 80gb hdd

Posted: October 10th, 2011, 1:34

Joined: October 10th, 2011, 1:24
Posts: 1
Location: United States

I have a Fujitsu 80gb hdd
model:mhw2080bh pl
part no:ca06820-b39200ap
Number on PCB is: ca26343-b84304ba
I was wondering if anyone knew where I could find a PCB for my hdd.
My hdd is making a clicking sound and I figured I could try to swap out PCB and see if that will fix the problem.

Top

northwind

Post subject: Re: Need a PCB for a Fujitsu 80gb hdd

Posted: October 10th, 2011, 8:06

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece

Your assumption is probably wrong.
If drive spins up and clicks, then most probably there is absolutely no problem with your pcb.

Clicking could mean bad heads or some other problem like corrupted firmware.
Both these are not DIY and you should consider sending disk to a pro in your area.
If data is important, that is.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Market

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum