| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Western Digitial - WD1600 wanted http://forum.hddguru.com/viewtopic.php?f=15&t=21700 |
Page 1 of 1 |
| Author: | bullets [ January 11th, 2012, 18:06 ] |
| Post subject: | Western Digitial - WD1600 wanted |
Hi, does anyone have one of these? Burnt out PCB here Western Digital Caviar WD1600 Model: WD1600JD-00HBB0 DATE: 17 Jul 2004 DCM: HSBACTJAA Revision #: 2060-001267-001 Rev A Thanks |
|
| Author: | Turtle Man [ January 12th, 2012, 0:04 ] |
| Post subject: | Re: Western Digitial - WD1600 wanted |
I have a WD1600AABS in hand. Let me know if it meets your needs. Thanks |
|
| Author: | harddrivespecialist [ January 12th, 2012, 11:52 ] |
| Post subject: | Re: Western Digitial - WD1600 wanted |
Turtle Man wrote: I have a WD1600AABS in hand. Let me know if it meets your needs. Thanks Unfortunately, this PCB is not compatible. |
|
| Author: | pcimage [ January 12th, 2012, 17:05 ] |
| Post subject: | Re: Western Digitial - WD1600 wanted |
bullets wrote: Hi, does anyone have one of these? Burnt out PCB here Western Digital Caviar WD1600 Model: WD1600JD-00HBB0 DATE: 17 Jul 2004 DCM: HSBACTJAA Revision #: 2060-001267-001 Rev A Thanks Almost certainly will have this PCB but you WILL need to transfer the ROM chip. Or we can do it for a small fee. PM or email if interested. |
|
| Author: | lowtimeppl [ January 27th, 2012, 19:54 ] |
| Post subject: | Re: Western Digitial - WD1600 wanted |
Hi I have the same disk - WD Caviar WD1600JB and the pcb on mine burned out too..I watched it happen...! Up until the the drive was working fine, I removed the pcb and can see the damaged chip, top right most chip on the pcb..which I am assuming is not the ROM chip referred to above..I assume that refers to the biggest square chip in the centre of the board? So my point is, please, pcimage.co.uk, what would be the cost of returning the drive complete with damaged pcb for reference and matching, and having it returned to me with the replacement pcb installed including ROM transferral? If you would prefer, please send an IM. As this is somewhat of an odd request, I have posted it here rather than via your web page. Thanks for reading! |
|
| Author: | lowtimeppl [ January 27th, 2012, 19:57 ] |
| Post subject: | Re: Western Digitial - WD1600 wanted |
Actually I just saw your online quote request, I have submitted there too. Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|