| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| problem with wd2000jb-00kfa0 http://forum.hddguru.com/viewtopic.php?f=15&t=22704 |
Page 1 of 1 |
| Author: | neroseu [ April 19th, 2012, 2:03 ] |
| Post subject: | problem with wd2000jb-00kfa0 |
Hi, My HDD wd2000jb-00kfa0 has the next problem : it starts for 2-3 seconds and dies and this rputine is done about 5 times and then it dies completely and if I unplug it and plug it back it makes that noise like "clank" from about 3 to 3 seconds. I assume it is the PCB that has a problem. On the PCB it is writen 2060-701314-002 REV A. Can someone advise if I can solve the problem with another PCB and if yes can someone sell me the right one that doesn't need any chip replacement? Thank you. |
|
| Author: | rameez [ April 19th, 2012, 2:15 ] |
| Post subject: | Re: problem with wd2000jb-00kfa0 |
It could be a pcb issue . Even if u get the right pcb ROM chip has to be changed . |
|
| Author: | northwind [ April 19th, 2012, 9:55 ] |
| Post subject: | Re: problem with wd2000jb-00kfa0 |
It could be mimics, but it's a long-shot. Could be heads, preamp... Needs to be diagnosed accurately. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|