HDD GURU FORUMS
http://forum.hddguru.com/

WANTED: A PCB/Board for a Seagate Barracuda 7200.11
http://forum.hddguru.com/viewtopic.php?f=15&t=23938
Page 1 of 1

Author:  bossmanmg [ September 8th, 2012, 18:26 ]
Post subject:  WANTED: A PCB/Board for a Seagate Barracuda 7200.11

Need a board/pcb for a Seagate Hard Drive I have.

NEEDS TO BE ABLE TO MATCH THE ONE I HAVE!!!!

INFO ON MOTHERBOARD:
100512585 F M9164H0A

INFO ON HARD DRIVE:
S/N: 5TE0B7P9
ST 31000333AS
P/N: 9FZ136-568
FIRMWARE: SD35
DATE CODE: 09214
SITE CODE: SU

IF YOU HAVE A BOARD/PCB THAT IS IN WORKING CONDITION PLEASE CONTACT ME. I DO NOT NEED THE WHOLE HARD DRIVE JUST THE BOARD. THANK YOU!

Attachment:
IMAG0525.jpg
IMAG0525.jpg [ 1.12 MiB | Viewed 7097 times ]

Attachment:
IMAG0526.jpg
IMAG0526.jpg [ 1.15 MiB | Viewed 7097 times ]

Attachment:
IMAG0530.jpg
IMAG0530.jpg [ 1.04 MiB | Viewed 7097 times ]

Author:  labtech [ September 8th, 2012, 19:43 ]
Post subject:  Re: WANTED: A PCB/Board for a Seagate Barracuda 7200.11

Typically, these drives do not have PCB issues. Are you sure it is a PCB issue?

Author:  DRforensic [ September 10th, 2012, 17:14 ]
Post subject:  Re: WANTED: A PCB/Board for a Seagate Barracuda 7200.11

http://pcb-hdd.com/st31000333as-sd35-10 ... -1646.html

Author:  Eric Lee [ September 12th, 2012, 8:42 ]
Post subject:  Re: WANTED: A PCB/Board for a Seagate Barracuda 7200.11

Hi, we have this working PCB, pls contact my hotmail.

Thanks, Eric

Author:  hddzone [ February 26th, 2013, 0:11 ]
Post subject:  Re: WANTED: A PCB/Board for a Seagate Barracuda 7200.11

The PCB's donor PCB should have same board number - 100512588 as yours. When you get this PCB, you need move your original PCB's BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.

Author:  northwind [ February 26th, 2013, 4:36 ]
Post subject:  Re: WANTED: A PCB/Board for a Seagate Barracuda 7200.11

what's with the knife?

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/