HDD GURU FORUMS
http://forum.hddguru.com/

Looking PCB for TOSHIBA MK5055GSX - HDD2H21 C WL01 S
http://forum.hddguru.com/viewtopic.php?f=15&t=26473
Page 1 of 1

Author:  XTRO [ July 23rd, 2013, 5:18 ]
Post subject:  Looking PCB for TOSHIBA MK5055GSX - HDD2H21 C WL01 S

Hello I need a PCB compatible with this Toshiba Harddisk:
TOSHIBA MK5055GSX - HDD2H21 C WL01 S.
PCB Number G002439-0A,
Controller Chip: 88I8817D-BHJ2
Firmware: 010 A0/FG001A

The drive Powered no spinning no sound at all (silent). I think could be dead PCB or blown fuse.

Thanks

Author:  pcimage [ July 25th, 2013, 7:30 ]
Post subject:  Re: Looking PCB for TOSHIBA MK5055GSX - HDD2H21 C WL01 S

Check the fuse first :-)

Post a pic if you don't know where it is.

Author:  XTRO [ July 25th, 2013, 17:08 ]
Post subject:  Re: Looking PCB for TOSHIBA MK5055GSX - HDD2H21 C WL01 S

Thanks, the PCB is the same like this link viewtopic.php?t=19939&start=

but i don't Know how can i change the fuse, and where can i buy a new one. The fuse surface is labeled "S".

Thanks again

Author:  fzabkar [ July 25th, 2013, 17:27 ]
Post subject:  Re: Looking PCB for TOSHIBA MK5055GSX - HDD2H21 C WL01 S

Follow my instructions in that link. Farnell is one supplier. You could probably find it at Mouser and Digikey, also. However, do some resistance testing first. Do you have a multimeter? If not, a DMM should cost you less than US$10. I can help you with the test points.

Author:  XTRO [ July 27th, 2013, 13:39 ]
Post subject:  Re: Looking PCB for TOSHIBA MK5055GSX - HDD2H21 C WL01 S

Thanks for the info. I'll do resistance test first.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/