Try looking for a 80gb model, that will have two heads.
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| WD400BD-75LRA0 http://forum.hddguru.com/viewtopic.php?f=15&t=32167 |
Page 1 of 1 |
| Author: | hdd_sand [ October 23rd, 2015, 17:14 ] |
| Post subject: | WD400BD-75LRA0 |
I'm looking for a WD400BD-75LRA0 DSBACVJCH 05JUL2005 MALAYSIA Drive has only 1 Heads All I have been able to find the head map is H1 and I need H0 Thank you in advance |
|
| Author: | pcimage [ October 23rd, 2015, 17:28 ] |
| Post subject: | Re: WD400BD-75LRA0 |
Try looking for a 80gb model, that will have two heads.
|
|
| Author: | thatdellguy [ October 23rd, 2015, 17:53 ] |
| Post subject: | Re: WD400BD-75LRA0 |
Two heads are better than one.... |
|
| Author: | hdd_sand [ October 26th, 2015, 10:56 ] |
| Post subject: | Re: WD400BD-75LRA0 |
I already tried with 80GB same DCM and close DCM still drive does not init.... |
|
| Author: | Amarbir[CDR-Labs] [ October 26th, 2015, 11:46 ] |
| Post subject: | Re: WD400BD-75LRA0 |
hdd_sand wrote: I already tried with 80GB same DCM and close DCM still drive does not init.... Well, The 80GB Has Two Heads So Disable The Head You Do Not Want And enable Only The Head You Like .It Should Work .Take Some Advice From Senior Techs Around On The Forums ,Please Repost in Proper Location Again Not Market Section if You Like To Continue This Discussion |
|
| Author: | hdd_sand [ October 26th, 2015, 12:24 ] |
| Post subject: | Re: WD400BD-75LRA0 |
Amarbir wrote: So Disable The Head You Do Not Want And enable Only The Head You Like Cpt Obvious....I posted on the right location, I'm looking for a donor not for advice. Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|