HDD GURU FORUMS

NAND Flash Reader with BGA272 BGA316 BGA224（8bit/16bit) adapter , support 4CE and 8CE chips, only used Flash Extractor,All tested ok, If you are interested please contact with SKYPE：13378120549 (49335007@qq.com) , JAKC LEE.

BGA272 8BANK Testing.

BGA272 8CE ECC TEST OK.

BGA224 8bit Testing.

BGA224 8bit Tested ECC OK.

BGA316 4CE Testing.

BGA316 Tested OK

Hi Lee ,
I Wanted To Know If You Sell The Actual Flash Extractor Reader Also .I Am Interested To Buy That With the Following Adapters .

1 : Basic TSOP48 Adapter X 1 Unit
2 : TLGA Adapter 18x14mm X 1 Unit
3 : BGA 152 18x14mm X 1 Unit
4 : Monolith Adapter X 10 Units

PS : I Also See You Have Few Other Adapters ,I Would Not Mind Getting These Cost Also

Sorry we do not your adapter.

Amarbir[CDR-Labs] wrote:Hi Lee ,
I Wanted To Know If You Sell The Actual Flash Extractor Reader Also .I Am Interested To Buy That With the Following Adapters .

1 : Basic TSOP48 Adapter X 1 Unit
2 : TLGA Adapter 18x14mm X 1 Unit
3 : BGA 152 18x14mm X 1 Unit
4 : Monolith Adapter X 10 Units

PS : I Also See You Have Few Other Adapters ,I Would Not Mind Getting These Cost Also

Well done,Mr.LEE.
May I know how much your socket sell?

UP!!UP!!UP!!

Anyone actually tested and tried those?

I don't know very much about this - and I get that this could be a completely absurd question; but is it not possible to do this with IP Box2 ? It'll read a chip, data dump, etc - from NAND. Isn't it going to the the SW that re-integrates it?

The cost about $200... I just assumed you'd need the PC 3000, too.



https://www.ebay.com/i/162812694908?chn ... 1852557203

UP !! UP！UP！

einstein9, tested. Works

arvika wrote:einstein9, tested. Works

Yup, perfect set added,