| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Want to buy Samsung Head Exchange Tool - F1/F2/F3/F4 p2-3 http://forum.hddguru.com/viewtopic.php?f=15&t=38693 |
Page 1 of 1 |
| Author: | -BR- [ July 25th, 2019, 14:55 ] |
| Post subject: | Want to buy Samsung Head Exchange Tool - F1/F2/F3/F4 p2-3 |
If someone is interested to sell an used Samsung head comb tool from hddsurgery or hddheadtools please PM with pictures and price Also interested in similar tools for the same HDD families (F1/F2/F3) from other makers Shipping to Brazil will be needed Need for hdds with 2 (or more) platters Here you can find what I am looking for: https://hddsurgery.com/data-recovery-tools/hdds-sam-f1-f2-f3-p2-3 https://www.hddheadtools.com/product/samsung-hdd-metal-comb-for-f1-f2-f3/ |
|
| Author: | LarrySabo [ July 25th, 2019, 17:25 ] |
| Post subject: | Re: Want to buy Samsung Head Exchange Tool - F1/F2/F3/F4 p2- |
Have you tried the Apex Tool lab "unstuck tools" as an alternative? |
|
| Author: | -BR- [ July 25th, 2019, 20:19 ] |
| Post subject: | Re: Want to buy Samsung Head Exchange Tool - F1/F2/F3/F4 p2- |
LarrySabo wrote: Have you tried the Apex Tool lab "unstuck tools" as an alternative? I heard of this tools, but never used before I fear because they don´t have a locking pin, they might detach more easily from the head stack Do you have any experience with this tools? |
|
| Author: | LarrySabo [ July 25th, 2019, 22:06 ] |
| Post subject: | Re: Want to buy Samsung Head Exchange Tool - F1/F2/F3/F4 p2- |
Yes, I've used them (E-Type as well as the other types) but prefer their C-Type tool when applicable. You are right -- you have to be careful removing the head stack with the E-tool in place, as I've had the tool fall out after removing the HSA. It just requires awareness of the need to be careful and gentle. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|