| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut http://forum.hddguru.com/viewtopic.php?f=15&t=41441 |
Page 1 of 1 |
| Author: | leito [ June 27th, 2021, 14:48 ] |
| Post subject: | Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
Greetings, colleagues. I started making sockets for three readers. So far, there are only 3*7. I am working on mSD 6*4 and SD 2*13. On PC-3000 work over Multiboard. If someone is interested, the price is 85 USD. Delivery by regular mail ~10USD. skype: mega-yoga telegram: @DATALABS alexsilkin@yandex.ru More photos on Instagram https://www.instagram.com/datalabs/   
|
|
| Author: | leito [ August 14th, 2021, 4:48 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
https://www.ebay.com/itm/Datarecovery-M ... 632-2357-0 |
|
| Author: | leito [ August 29th, 2021, 13:17 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
https://www.ebay.com/itm/185021821161 |
|
| Author: | ddrecovery [ September 7th, 2021, 13:11 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
I have tried this product on PC-3000 Flash and FE and can confirm it works great. |
|
| Author: | lcoughey [ September 7th, 2021, 15:20 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
My adapters arrived today. |
|
| Author: | leito [ August 5th, 2023, 19:23 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
https://boosty.to/data_recovery |
|
| Author: | ddrecovery [ June 19th, 2025, 12:54 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
Anyone have more recent contact details fo Alex. Sent an email to the address above but no reply. |
|
| Author: | Lardman [ June 19th, 2025, 16:16 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
I've tried to get hold of these twice via Apexlabs and wasn't able to, Not sure if they're actually still available. |
|
| Author: | ddrecovery [ June 19th, 2025, 16:20 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
Lardman wrote: I've tried to get hold of these twice via Apexlabs and wasn't able to, Not sure if they're actually still available. Thanks Mike. I am actually only after some of the pogo pins used in the socket. One of mine has locked up and needs replacing. There are literally 1000's of pogo pins and its hard to track down the right size anf type. I was hoping Alex could give me the specs. |
|
| Author: | Lardman [ June 20th, 2025, 4:06 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
I used some P50-B1 20g in a similar project recently, the pressure on the tip was the main concern. The selection narrows dramatically the finer you go on the scale do you have a picture of them - specifically the tip type, can you measure what's already there with callipers or are they in accessible? |
|
| Author: | ddrecovery [ June 20th, 2025, 10:46 ] | ||
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut | ||
Overall length - 12mm Tip Length - 1.87mm Tip width - 0.37mm Tip length - 0.5mm I have done extensive searching but have not found one.
|
|||
| Author: | Lardman [ June 20th, 2025, 11:13 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
PA-038 looks about right possibly and F tip. |
|
| Author: | ddrecovery [ June 20th, 2025, 11:23 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
Lardman wrote: PA-038 looks about right possibly and F tip. Sorry I gave you a bum steer there with the body width. This is what I should have detailed Overall length - 12mm Tip Length - 1.87mm Tip width - 0.37mm Body Width - 0.5mm |
|
| Author: | Lardman [ June 21st, 2025, 3:49 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
I can't find anything at the usual suspects either - the 0.5mm OD on the barrel appears to be the main problem. I can find similar at some niche places but they all have a different metric off. If you can't get anything you could drill out the VCC & VDD to use a more common size and swap those pins into the control/data lines. |
|
| Author: | Arch Stanton [ June 21st, 2025, 9:23 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
I always contact him via Insta chat, https://www.instagram.com/datalabs/ Seems he was online few hours ago. |
|
| Author: | ddrecovery [ June 21st, 2025, 11:40 ] |
| Post subject: | Re: Socket for microSD 3x7 --- 3in1 PC3000, FE, Rusolut |
Arch Stanton wrote: I always contact him via Insta chat, https://www.instagram.com/datalabs/ Seems he was online few hours ago. Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|