HDD GURU FORUMS

Hello guys,

As always we are working hard every day to make your DR work faster and easier. Today we are back with updated product

In late 2018 we first release UFD MR36 adapter with support various card. Across 3 years we found other cards with diffrent NAND pinout location available which require from us project from scratch new adapter. Today we are ready to show new, updated v2 edition. What changes ??

- contains 3 seperate inners for diffrent NAND pinout location on monolith
- contains 4 diffrent sockets (4 diffrent pinouts) + 1 build-in into adapter. This gives you 5 pinouts totally
- support 99% cards with raster of UFD Toshiba on market for this moment

Ofcourse all previous advantages like work with 3 diffrent devices, power mode enable, VCC/GND cutout it's also available here !

What type you can support ?
Default build-in monolith pinout:



Monolith pinout supported by MR36 V2 AP1 or AP2



Monolith pinout supported by MR36 V2 AP3:



Monolith pinout supported by MR36 V2 AP4:



Inners in set:


Sockets in set:


Adapter photo:





Orders: https://multi-com.eu/shrt-ihUkypaJo
More info: https://multi-recovery.com/subpages/MR36UFD.php