HDD GURU FORUMS :: View topic - Probe plate without welding

HDD GURU FORUMS http://forum.hddguru.com/

Probe plate without welding http://forum.hddguru.com/viewtopic.php?f=15&t=41662	Page 1 of 1

Author:

xgkj [ September 5th, 2021, 15:50 ]

Post subject:

Probe plate without welding

I made 7 kinds of boards for WD USB hard disk， I started this board in China in July this year，Now belongs to JUN DA CHENG 。
PC-3000 for WD USB 800067

Attachment:

800067.png [ 96.35 KiB | Viewed 11174 times ]

PC-3000 for WD USB 800069

Attachment:

800069.png [ 135.35 KiB | Viewed 11174 times ]

PC-3000 for WD USB 810003

Attachment:

810003.png [ 71.63 KiB | Viewed 11174 times ]

PC-3000 for WD USB 810012

Attachment:

810012.png [ 88.53 KiB | Viewed 11174 times ]

PC-3000 for WD USB 810033

Attachment:

810033.png [ 74.89 KiB | Viewed 11174 times ]

PC-3000 for WD USB 810035

Attachment:

810035.png [ 84.9 KiB | Viewed 11174 times ]

PC-3000 for WD USB 800041

Attachment:

800041.png [ 88.67 KiB | Viewed 11174 times ]

I've done several before.

Attachment:

2.png [ 269.29 KiB | Viewed 11174 times ]

Attachment:

3.png [ 389.59 KiB | Viewed 11174 times ]

Maybe you've seen similar products. Interested friends can see the launch date，Friends in need can contact me。 XG and 鑫广科技 It's my logo

My QQ:2169571 2169571@qq.com

Attachments:

800069.png [ 135.35 KiB | Viewed 11174 times ]

Author:	xgkj [ September 5th, 2021, 22:56 ]
Post subject:	Re: Probe plate without welding
I may have made an editorial error when posting，The probe board itself is not a decryption board. With it, there is no need to weld the USB board into SATA. Simple installation can convert the USB board into SATA interface, and the SED data output of the original board is normal Attachment: QQ图片20210906034430.png [ 692.03 KiB \| Viewed 11097 times ] Attachment: QQ图片20210906105428.png [ 361.27 KiB \| Viewed 11097 times ] Attachment: XIN.png [ 356.83 KiB \| Viewed 11097 times ]

Author:	pclab [ September 6th, 2021, 17:47 ]
Post subject:	Re: Probe plate without welding
Your website is not working... Can you post more details, like the prices?

Author:	LarrySabo [ September 6th, 2021, 20:33 ]
Post subject:	Re: Probe plate without welding
pclab wrote: Your website is not working... Here's what I get when I go to https://www.jundacheng.com/... Attachment: Security warning.jpg [ 68.31 KiB \| Viewed 11037 times ]

Author:	xgkj [ September 7th, 2021, 1:07 ]
Post subject:	Re: Probe plate without welding
pclab wrote: Your website is not working... Can you post more details, like the prices? Website problems are being repaired The ownership of UTS probe board belongs to 军成成。 I will no longer participate in the sales work. I just saw someone plagiarize, So explain the time of my release.

Author:	ddrecovery [ September 7th, 2021, 11:24 ]
Post subject:	Re: Probe plate without welding
LarrySabo wrote: pclab wrote: Your website is not working... Here's what I get when I go to https://www.jundacheng.com/... Attachment: Security warning.jpg I get the same type of message.

Author:	labtech [ September 7th, 2021, 15:57 ]
Post subject:	Re: Probe plate without welding
LarrySabo wrote: pclab wrote: Your website is not working... Here's what I get when I go to https://www.jundacheng.com/... Attachment: Security warning.jpg Went head despite the warning... The website does not seem to be in existence. Maybe is no longer hosted or something.

Author:	fzabkar [ September 7th, 2021, 16:34 ]
Post subject:	Re: Probe plate without welding
Works for me. Use "http" instead of "https". http://www.jundacheng.com/bbs/forum.php

Author:	DeVlL [ September 7th, 2021, 16:47 ]
Post subject:	Re: Probe plate without welding
Their PCBs are very similar to these. Not to say that they are practically the same. https://www.hddheadtools.com/product-ca ... onnectors/

Author:

xgkj [ September 7th, 2021, 23:17 ]

Post subject:

Re: Probe plate without welding

DeVlL wrote:

Their PCBs are very similar to these. Not to say that they are practically the same.

https://www.hddheadtools.com/product-ca ... onnectors/

You are not in China and may not know the details. Some of them have received my board. Is to create at the same time, so why are the methods of protecting the probe, including the selection of

Attachment:

QQ图片20210908110857.png [ 62.52 KiB | Viewed 10688 times ]

黄框内可以生产探针的胶座，箭头指向孔是为了生产胶座固定的孔
The rubber base of the probe can be produced in the Yellow frame. The arrow points to the hole to produce the fixed hole of the rubber base

There are at least three kinds of things. Is there such a coincidence? Can you call it similar?

Attachments:

QQ图片20210908110052.jpg [ 559.67 KiB | Viewed 10688 times ]

Author:	xgkj [ September 8th, 2021, 8:23 ]
Post subject:	Re: Probe plate without welding
DeVlL wrote: Their PCBs are very similar to these. Not to say that they are practically the same. https://www.hddheadtools.com/product-ca ... onnectors/ In China, green substrates are for proofing and testing, and later production generally sinks gold. The product has only been uploaded in the past two days and is being updated. Obviously, it is making finished products and then sending drawings. Many people understand this. Attachment: QQ图片20210908110052.jpg [ 559.67 KiB \| Viewed 10688 times ] Product similarity is OK. However, the protection method of the probe, the method of raising the probe, including the selection of screws, are surprisingly similar. Can't it explain plagiarism? Attachment: QQ图片20210908195241.jpg [ 450.46 KiB \| Viewed 10688 times ] Attachment: QQ图片20210908200526.jpg [ 540.06 KiB \| Viewed 10688 times ] I am not a professional PCB designer, so there are many mistakes in doing so. I sent several people to help me test, which is also the reason why I was copied. For example, GND should be set at the board fixing column, but it was not set at that time. I have corrected it later, which can be found by comparison. Introduction and information of UTS board：http://www.jundacheng.com/bbs/forum.php?mod=viewthread&tid=6047

Author:	DeVlL [ September 8th, 2021, 15:47 ]
Post subject:	Re: Probe plate without welding
So you are the creator of those PCBs and did they copy you? What is the cost of your PCBs?

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/