All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: USB hard disk retrofitting SATA device
PostPosted: September 12th, 2022, 4:22 
Offline
User avatar

Joined: August 29th, 2021, 5:46
Posts: 33
Location: China
Hi! hello everyone
USB hard disk retrofitting SATA device
Attachment:
1.png
1.png [ 65.09 KiB | Viewed 7077 times ]
Attachment:
2.png
2.png [ 99.61 KiB | Viewed 7077 times ]

The top two are PCBs design sketch
Advantages of this board
1.No soldering, no PCB damage([i]Many of the actual tests do not need to remove the isolation capacitor[/i].)
2.At least only 4 needles need to be placed (SATA signal) The USB hard disk is powered by a direct USB cable
3.The board has its own locking screw
4.ntegrated functions of pc3000 USB mirror
5.It is not limited to WD USB HDD, but also supports all future SATA protocols such as Toshiba, Samsung, etc

Attachment:
3.png
3.png [ 445.35 KiB | Viewed 7077 times ]
Attachment:
4.png
4.png [ 396.69 KiB | Viewed 7077 times ]
Attachment:
5.jpg
5.jpg [ 226.66 KiB | Viewed 7077 times ]

_________________
My Website: https://xgfix.com
SKYPE: soo558


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 13th, 2022, 2:45 
Offline
User avatar

Joined: August 29th, 2021, 5:46
Posts: 33
Location: China
MY qq:2169571 Mail 2169571@qq.com

Preferential prices are available until the 20th of this month,Now it only needs 90 USD
The price will be increased from the 21st!

_________________
My Website: https://xgfix.com
SKYPE: soo558


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 13th, 2022, 3:35 
Offline
User avatar

Joined: March 28th, 2018, 13:24
Posts: 5
Location: S.Wales
Hi there
cool looking adapter

just out of curiosity what is underneath the RF shield..?


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 14th, 2022, 4:35 
Offline
User avatar

Joined: August 29th, 2021, 5:46
Posts: 33
Location: China
NANDoff wrote:
Hi there
cool looking adapter

just out of curiosity what is underneath the RF shield..?

Transfer of IC chip and power supply required by IC,
不光用于信号的屏蔽,也对杂物掉落引起短路的一种保护
It is not only used for signal shielding, but also for protection against short circuit caused by falling debris

_________________
My Website: https://xgfix.com
SKYPE: soo558


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 14th, 2022, 6:35 
Offline
User avatar

Joined: August 29th, 2021, 5:46
Posts: 33
Location: China
Now, the promotion discount period is less than half of the normal price。
This work was tested by a few people last year. I have sold a lot in China.
If you need, please do not miss the discount period. This discount period is calculated according to my email reply!
Attachment:
673.png
673.png [ 587.76 KiB | Viewed 6843 times ]



Attachment:
86.jpg
86.jpg [ 257.9 KiB | Viewed 6843 times ]

_________________
My Website: https://xgfix.com
SKYPE: soo558


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 15th, 2022, 6:20 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 97
Location: Tunisia
what USB adapter version does your board support?

Would this work with Rapidspar and R-studio?

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 15th, 2022, 6:54 
Offline
User avatar

Joined: August 29th, 2021, 5:46
Posts: 33
Location: China
Setlec wrote:
what USB adapter version does your board support?

Would this work with Rapidspar and R-studio?

I mainly test PC3000 (UDMA EXPRESS P3) MRT DFL. I have not used the tool you mentioned. In terms of effect, PC3000 is the best!

_________________
My Website: https://xgfix.com
SKYPE: soo558


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 16th, 2022, 6:05 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 97
Location: Tunisia
Does your adapter works with any USB based brand?

Also how does it react with dd-rescue , R-Studio, DMDE or UFS Explorer.

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch


Top
 Profile  
 
 Post subject: Re: USB hard disk retrofitting SATA device
PostPosted: September 16th, 2022, 6:51 
Offline
User avatar

Joined: August 29th, 2021, 5:46
Posts: 33
Location: China
Setlec wrote:
Does your adapter works with any USB based brand?

Also how does it react with dd-rescue , R-Studio, DMDE or UFS Explorer.



You can leave an email for me, and I will send you a test video.

_________________
My Website: https://xgfix.com
SKYPE: soo558


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group