HDD GURU FORUMS

Hi! hello everyone
USB hard disk retrofitting SATA device

The top two are PCBs design sketch
Advantages of this board
1.No soldering, no PCB damage（[i]Many of the actual tests do not need to remove the isolation capacitor[/i].）
2.At least only 4 needles need to be placed (SATA signal) The USB hard disk is powered by a direct USB cable
3.The board has its own locking screw
4.ntegrated functions of pc3000 USB mirror
5.It is not limited to WD USB HDD, but also supports all future SATA protocols such as Toshiba, Samsung, etc

MY qq:2169571 Mail 2169571@qq.com

Preferential prices are available until the 20th of this month,Now it only needs 90 USD
The price will be increased from the 21st!

Hi there
cool looking adapter

just out of curiosity what is underneath the RF shield..?

NANDoff wrote:Hi there
cool looking adapter

just out of curiosity what is underneath the RF shield..?

Transfer of IC chip and power supply required by IC，
不光用于信号的屏蔽，也对杂物掉落引起短路的一种保护
It is not only used for signal shielding, but also for protection against short circuit caused by falling debris

Now, the promotion discount period is less than half of the normal price。
This work was tested by a few people last year. I have sold a lot in China.
If you need, please do not miss the discount period. This discount period is calculated according to my email reply!

what USB adapter version does your board support?

Would this work with Rapidspar and R-studio?

Setlec wrote:what USB adapter version does your board support?

Would this work with Rapidspar and R-studio?

I mainly test PC3000 (UDMA EXPRESS P3) MRT DFL. I have not used the tool you mentioned. In terms of effect, PC3000 is the best!

Does your adapter works with any USB based brand?

Also how does it react with dd-rescue , R-Studio, DMDE or UFS Explorer.

Setlec wrote:Does your adapter works with any USB based brand?

Also how does it react with dd-rescue , R-Studio, DMDE or UFS Explorer.

You can leave an email for me, and I will send you a test video.

hi xgkj, hi do you still sell this? please send me PM