Hello guys,

After over 6 months of hard and intensive work including many projects, prototyping, checking different configurations we can announce officially that NEW monolith MR SD Cards adapters are officially READY !

What cards does they support ?






Ofcourse each of this can be connected beetwen devices as VNR (Rusolut), Flash Extractor (Soft Center) or PC3000 Flash v4 (Ace Laboratory) without any soldering. Each of adapter support different card size by inners and can support different pinout configuration by special socket (look to movie to see how simple we can change pinout from 1 type of pinout to second one... as examples for 2th channel). Impossible ??? Check 36 minutes movie at https://youtu.be/GPHeLh1NwIw

Below photos will give more information about supported size and configurations !!!

MR39 configuration and supported card sizes as below:


MR29 configuration and supported card sizes as below:


MR40 configuration and supported card sizes as below:


MR42 configuration and supported card sizes as below:


MR35 configuration and supported card sizes as below:


Some socket photos below:




How to install adapters on different devices as VNR, FE, PC3000 Monolith board v4 or Multiboard ?






Below links:
Video of using MR40, 42, 39, 35, 29 SD adapters- https://youtu.be/GPHeLh1NwIw
MR40 SD Monolith product link - https://multi-com.eu/shrt-C8DWgvxEH
MR42 SD Monolith product link - https://multi-com.eu/shrt-pED0xFc0z
MR39 SD Monolith product link - https://multi-com.eu/shrt-IUi3QcYPI
MR35 SD Monolith product link - https://multi-com.eu/shrt-UWceLvp3
MR29 SD Monolith product link - https://multi-com.eu/shrt-3hZAWCvLu


P.S#1
Companies interested in reselling contact directly to biuro@multi-com.pl for quotes.

P.S#2
If you are looking microSD cards MR series adapter look at http://forum.hddguru.com/viewtopic.php?f=15&t=35872

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland

Very impressive!

_________________
A backup a day keeps DR away.

Nice work!

_________________
Web: https://www.day1data.de

State of the art ,
Will start reselling and using in india ASAP

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Very nice. Is there development for Micro SD Cards soon, too?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Labtech, did you see this: viewtopic.php?f=15&t=35872

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk

Labtech ,
Bro They Had Released Those Before SD Cards Last Year ,check Their Youtube Channel

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Yep, I missed that. My bad. Good stuff.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Thank you for all good words - since receiving a questions on PM how pinout configuration is changed in MRSD adapters just few words with explanation to make all clear since many of you don't have time to watch full video from us. So.....pinouts are changed by so called sockets which fit to adapter.

Socket for MR40 looks like:


Each of socket got name like for example
"MR40AP1" where:
MR40 - adapter model
AP1 - Alternative Pinout 1

to use them so to change pinout in less than 10 second we simply make ALL switches on adapter to OFF position and put socket into adapter. After installation in adapter it will look like this:


Similar are for other adapters like MR35:


and after installation



but there are adding some information like C1/C2 so on socket you will see

MR35AP2C1 which means
MR35 - MR35 adater type
AP2 - aleternative pinout 2
C1 - channel 1 (so reading by 8 bit bus from first channel)... if you will use C2 it will read second channel

And final answer to questions about additional sockets updates with new pinouts ???? YES - we will make additional sockets if raster of card will fit.... even more: each customer who will send to us card and pinout for new configuration will receive FREE SOCKET ! So if after 6 months you will use our adapter and will find card with different pinout configuration to which you got pinout just send us this card and pinout - we will make inner for different size (if necessary) + socket for this pinout and send you for free of charge including shipment.....

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland

Hi Boguslaw ,
I have sent you a email for reselling Products in India .Kindly Check your email and respond back ,Its been a few hours since i have emailed .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Hello Amarbir,

Answered ))

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland

Is there anyway i could know which MR to buy??

And which one are most versatile, most used by SD companies, like Sandisk, Kingston, Lex???