HDD GURU FORUMS

SATA buffering and signal enhancement board:

Supports all tools such as MRT, DFL, PC3000, not limited to PC3000

1. Compensate differential signals to suppress more interference

2. Special support for solving some old versions of P3 Seagate hard drives that do not rotate

3. Control the gain through 6 switches to solve the problem of changing some SATA busy disks

4. Anti static up to 25KV, providing more protection for equipment. Two interface connection options available



20 USD during the discount period
If you need anything, please contact me,
MY SKYPE：https：//join.skype.com/invite/wQ9wdfVf05PM

QQ:2169571

Mail 2169571@qq.com

Which SATA redriver chip are you using? I saw an MRT PCB which used the wrong chip. Hopefully you haven't followed their example.

fzabkar wrote:Which SATA redriver chip are you using? I saw an MRT PCB which used the wrong chip. Hopefully you haven't followed their example.

Firstly, I have been working on this for a long time, and it was first used on my needle plate.

https://forum.hddguru.com/viewtopic.php?f=15&t=42730
Secondly, regardless of the ACE or MRT chip, I haven't seen any errors in the design. I don't know what the reason for the incorrect chip you mentioned is?

fzabkar wrote:Which SATA redriver chip are you using? I saw an MRT PCB which used the wrong chip. Hopefully you haven't followed their example.

For me, there is no imitation. I started working on it in 2021, and the official black version was released on December 18th, 2021. It's just that I haven't posted many things abroad.



It cannot be said how great an invention is, it can only be said that it is still partially useful for its peers.