HDD GURU FORUMS
http://forum.hddguru.com/

SAS TO SATA Adapter board
http://forum.hddguru.com/viewtopic.php?f=15&t=44497		 Page 1 of 1
Author:  xgkj [ July 23rd, 2024, 11:14 ]
Post subject:  SAS TO SATA Adapter board
Attachment:
SAS.png
SAS.png [ 1.42 MiB | Viewed 18563 times ]

Attachment:
2.png
2.png [ 1.53 MiB | Viewed 18563 times ]

Attachment:
3.png
3.png [ 631.08 KiB | Viewed 18563 times ]

Attachment:
4.png
4.png [ 581.38 KiB | Viewed 18563 times ]

Converting SAS disks to standard SATA interfaces can replace HBA cards and be mirrored using tools such as PC3000 MRT DFL.
Line physical transfer, currently does not support firmware operations
150 USD/PCS
Just sold, promotion before the end of the month, buy with my previous works, the value of more than 450USD free shipping, but not tax!
SKYPE:soo558
E-Mail:2169571@qq.com
Author:  lcoughey [ July 23rd, 2024, 14:16 ]
Post subject:  Re: SAS TO SATA Adapter board
Out of curiosity, what kind of transfer speeds does one get through this adapter?
Author:  einstein9 [ July 24th, 2024, 3:13 ]
Post subject:  Re: SAS TO SATA Adapter board
@xgkj

works with portable ONLY?
direct sata access?
Author:  xgkj [ July 24th, 2024, 3:27 ]
Post subject:  Re: SAS TO SATA Adapter board
lcoughey wrote:
Out of curiosity, what kind of transfer speeds does one get through this adapter?

Actual full speed SATA2
Author:  xgkj [ July 24th, 2024, 3:29 ]
Post subject:  Re: SAS TO SATA Adapter board
einstein9 wrote:
@xgkj

works with portable ONLY?
direct sata access?



Physical hard adapter, suitable for any tool, can be directly connected to a computer.
Author:  Disk Solution [ July 25th, 2024, 12:47 ]
Post subject:  Re: SAS TO SATA Adapter board
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.
Author:  fzabkar [ July 25th, 2024, 15:29 ]
Post subject:  Re: SAS TO SATA Adapter board
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.

Try to find a bridge IC that connects an SAS device to a SATA host. If you can find one, then there should exist bridge PCBs/adaptors that use it. I confess that I haven't managed to find such a bridge, so that explains why the OP can charge whatever he likes. That's capitalism.
Author:  xgkj [ July 26th, 2024, 2:50 ]
Post subject:  Re: SAS TO SATA Adapter board
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.

If that's the case, then any ACE adapter board has no value!
Any adapter that packs FLASH is of no value.
Author:  xgkj [ July 26th, 2024, 2:51 ]
Post subject:  Re: SAS TO SATA Adapter board
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.

I don't want to deal with people who talk nonsense. Let's talk when you know the price of the chip! 30 USD, looking forward to benefiting all repairers! Don't just talk, watch your actions!
I don't want to deal with people who talk nonsense. Let's talk when you know the price of the chip! Selling this board for 30 USD, I look forward to benefiting all repairers! Don't just talk, watch your actions!
Author:  xgkj [ July 26th, 2024, 2:54 ]
Post subject:  Re: SAS TO SATA Adapter board
fzabkar wrote:
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.

Try to find a bridge IC that connects an SAS device to a SATA host. If you can find one, then there should exist bridge PCBs/adaptors that use it. I confess that I haven't managed to find such a bridge, so that explains why the OP can charge whatever he likes. That's capitalism.



How much do you charge when Seagate firmware door starts? If everyone knew that even one instruction line could solve it. That's basically free!
Author:  xgkj [ July 26th, 2024, 3:08 ]
Post subject:  Re: SAS TO SATA Adapter board
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.




For example, the handling fee for PAYPL is 5%, and the withdrawal fee is 15 USD each time. I hope you can also point out a 30 USD transfer board to sell to everyone!
Author:  xgkj [ July 26th, 2024, 3:39 ]
Post subject:  Re: SAS TO SATA Adapter board
fzabkar wrote:
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.

Try to find a bridge IC that connects an SAS device to a SATA host. If you can find one, then there should exist bridge PCBs/adaptors that use it. I confess that I haven't managed to find such a bridge, so that explains why the OP can charge whatever he likes. That's capitalism.


For example, Seagate's inflatable disc (as shown in the picture), now I charge around RMB 2000 to unlock it once in China. But it can be clearly stated that ACE will add some parts in the 7.5 update, which is free for those who have the tools and updates. What does this example illustrate?
Author:  Disk Solution [ July 26th, 2024, 4:16 ]
Post subject:  Re: SAS TO SATA Adapter board
fzabkar wrote:
Disk Solution wrote:
150 USD/PCS and does not support firmware operations!! I can order at $30/PCS. 150 USD/PCS is 10 times more than the cost of manufacturing.

Try to find a bridge IC that connects an SAS device to a SATA host. If you can find one, then there should exist bridge PCBs/adaptors that use it. I confess that I haven't managed to find such a bridge, so that explains why the OP can charge whatever he likes. That's capitalism.


Yes you are right I will find this, same this were experienced when I started creating Sediv power COM and winfof connentors, but now connentors will be ready with just $8 accessories.

OP can even ask $200 from those who are in need its fair but when fully operative, for imaging we have already some options.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/